Christie 003-120458-01 Projector Lamp Compatible with LX700 OEM Replacement

Lamp Specifications

The above parameters come from the Zorsika product database. For complete technical specifications, please contact your sales representative.

Compatible Models: 1 Christie Projector

Below are the verified compatible Christie projector models for lamp module 003-120458-01, separated by commas:

LX700

Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Three Points to Verify Before Purchasing

1. Verify the nameplate model: Open the projector lamp door and check that the model on the lamp module label matches 003-120458-01 exactly. Some Christie models may have suffixes like -V or +, but the lamp modules are usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm lamp configuration: The same model comes in four configurations: original sealed, original bare, replacement, and used. These differ significantly. Original bare means an OEM arc tube with a third-party lamp base, offering the best overall value. Be sure to specify which configuration you need on your order to avoid disputes upon delivery.
3. Verify physical specifications: Reflector size 80X80L and arc gap must match the original lamp. Any mismatch may result in installation failure or the lamp not lighting up.

Why Choose Zorsika PRO Series

003-120458-01 is a high-volume model. The Zorsika PRO Series controls arc tube consistency according to OEM specifications and performs an additional factory lighting test, ensuring better brightness and stability.

• Specification match: Power, arc gap, and reflector size are matched item by item to OEM specifications
• 100% tested: Each lamp undergoes lighting test before shipment for guaranteed brightness and stability
• Warranty commitment: 180-day warranty on lamps; normal use non-human damage is covered by after-sales service
• Stable supply: Supports bulk purchasing and project-based supply

Bottom line: If you want OEM-quality performance with greater overall peace of mind, the Zorsika PRO Series projector lamp is designed exactly for this scenario.

Note: Brightness, lifespan, and other performance characteristics are greatly affected by machine condition, usage environment, and thermal management. Zorsika does not make unified numerical commitments. It is recommended to test 1-2 sample lamps before bulk purchasing.

Daily Maintenance to Extend Lamp Life

• Timely dust cleaning: Dust buildup on the air intake and filter directly raises lamp operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use eco mode wisely: Prioritize eco mode when brightness is sufficient, as it reduces lamp thermal load.
• Avoid frequent switching: Thermal cycling is a major cause of lamp wear. If not using for a short period, use the shutter/mute function instead of repeatedly turning power on and off.
• Proper shutdown: Wait for the fan to stop completely before cutting power. Shutting down while the lamp is hot causes rapid cooling and is a common cause of lamp failure.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the machine will continue to alert based on the old timer.

FAQ

Q: My machine is not in the list of 1 models above. Can I use 003-120458-01?

A: The list shows verified models, not an exhaustive one. Christie products from the same generation often share compatible lamp modules. Take a photo of the machine's nameplate and original lamp label, then send it to Zorsika technical support - they can help confirm compatibility.

Q: How to choose between original packaging, bare lamp, or alternative lamp?

A: If you prioritize brightness stability and long-term reliability, Zorsika PRO series lamps are the top choice - each unit is matched item by item against original factory specifications and tested individually before shipment, delivering OEM-level performance with greater peace of mind, plus a 180-day warranty. For general commercial, educational, and meeting room use, the PRO series also offers better overall value. Other alternative lamps may cost less, but the lamp core source and quality control vary significantly, posing higher risks of brightness decay and shorter lifespan - these are only recommended for temporary backup units.

Q: Why choose Zorsika PRO over OEM?

A: The core logic behind Zorsika PRO series lamps is "original factory specs, self-controlled quality": power, arc gap, and reflector size are matched item by item to OEM specifications, with the added step of individual lamp testing before shipment, backed by a 180-day warranty. Compared to OEM, it's more reassuring overall; compared to other alternatives, it offers more stable quality control.

Q: What should I do if the projector shows a lamp not recognized error after replacing the lamp?

A: First, confirm whether the lamp timer has been reset - the vast majority of such errors are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support - we provide reset methods and troubleshooting guidance for the corresponding model.

Q: Is there an installation guide for 003-120458-01?

A: Yes. The lamp door positions and disassembly procedures for these Christie models are essentially the same. Contact Zorsika sales to get illustrated or video tutorials for your specific model.

Q: What is the warranty period for the lamp?

A: Zorsika PRO series projector lamps offer a 180-day warranty. Normal use and non-human damage (such as lamp explosion, early brightness decay abnormalities) are covered for after-sales service. Brightness decay within the standard range is considered normal usage wear and is not covered by the warranty.

Related Search

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Purchase Consultation

For Christie 003-120458-01 consultation, bulk pricing, or a complete model compatibility list, reach us through:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module model numbers, specifications, and model compatibility data in this article are sourced from Zorsika's product database. Data is continuously updated; please confirm with actual inquiry for accuracy.