FA107 Projector Lens for 1 Christie Engineering Model, Including C-WU2000L

FA107 is a medium-to-long zoom lens for engineering projectors (Christie). It is compatible with 1 model from 1 model series. This article presents the lens specifications, installation distance, model compatibility list, and replacement considerations in one place.

1. Lens Specifications

2. Installation Distance

The throw ratio for this model has not yet been added to our database. For installation distance, refer to the nameplate on the physical product and the user manual, or contact us for calculations based on site dimensions.

3. Compatible Models (1 Model, Christie)

The table below is arranged from newest to oldest by model production date and includes the resolution, brightness, and zoom ratio of the original lens for each model, making it easy to quickly identify the option that meets your project requirements.

The zoom ratio is the zoom factor of the original standard lens for this model (upper limit ÷ lower limit of the original throw ratio range), not the zoom range of the lens featured in this article.

Common Features of These Models

The original standard lenses for this model generally have throw ratios concentrated in the 1.5~2.0 range. The model in this article effectively adjusts the focal length range, allowing different image sizes from the same projection distance—this is the direct reason for replacing the lens. Full lens-shift capability is retained, so the image can still be aligned after the focal length range is adjusted.

4. Three Things to Confirm Before Replacement

• The panel size must be verified. The panel specifications for this model have not yet been added to our database. Please send us a photo of the projector nameplate for confirmation.
• Interfaces and locking mechanisms. Interfaces are generally compatible across platforms of the same generation, but the position of the locking latch varies by generation. If the image appears skewed or its edges are not sharp after installation, the latch is usually not fully engaged; this is not an issue with the lens itself.
• A fixed-focal-length lens has no zoom adjustment margin. The image size can only be changed by moving the projector, so site dimensions must be measured accurately first, with an additional 10–20 cm allowed at each endpoint.

For models outside the list, it is safer to send us the projector nameplate and a photo of the original lens for verification. Platforms of the same generation often share the same interfaces, but ordering based on a similar model name poses unnecessary risk.