Christie 003-120707-01 OEM Replacement Lamp for LX501 LWU421 LW401

003-120707-01 is a lamp module that remains widely deployed in Christie projectors, covering three models. This guide consolidates the lamp module specifications, replacement compatibility assessment, model compatibility list, and key checks to perform before replacement.

I. Lamp Module Specifications

These specifications are taken from the Zorsika product database. Contact sales for the complete technical datasheet.

II. Can It Serve as a Replacement? Check These Three Physical Specifications First

The key catalogued specifications for this lamp are: power 245W / 170W, reflector size 50X50D, base E19.4, and arc gap 0.8mm. Whether it can be used as a replacement depends on whether these specifications match the OEM lamp item by item: wattage determines whether the lamp driver board can power it, reflector size determines whether it fits into the lamp compartment, and the base and arc gap determine whether it will light.

Same wattage does not mean universal compatibility. Many lamps on the market have the same wattage but reflector sizes that differ by several millimeters. Forcing one to fit can prevent the lamp compartment cover from closing, shift the optical axis, or block the cooling airflow path. Conversely, if the reflector is the same but the wattage differs, the lamp driver board may report an error or the lamp may not light. The assessment order is: first identify the OEM lamp module model, then verify wattage and reflector size, and finally check the base type.

This lamp is used in models with LCD panels. Because each panel technology has different optical-path requirements for the arc position, cross-panel replacement may produce uneven brightness even if the lamp physically fits, and is therefore not recommended.

Standard Mode and Eco Mode

The two wattages are the drive-power levels supported by the lamp module. Whether they can actually be switched is determined by the projector menu; not all models offer the eco setting.

III. Compatible Models (3 Models, Christie)

The following Christie projector models have been verified as compatible with 003-120707-01:

LX501, LWU421, LW401

This is a list of verified models, not an exhaustive list. Projectors from the same generation often share the same lamp module. For a model not listed, send us photos of the projector nameplate and original lamp label for confirmation.

IV. Three Checks Before Replacement

1. Check the nameplate model: Open the lamp door and confirm that the model on the lamp module label exactly matches 003-120707-01. Some Christie models carry suffixes such as -V and +. The lamp module is generally compatible, but if you are unsure, send us a photo of the nameplate for confirmation.
2. Confirm the lamp format: The same model is available in four variants: OEM packaged, OEM bare lamp, aftermarket replacement, and used, with substantial differences. An OEM bare lamp pairs an OEM arc tube with a third-party lamp holder and generally offers the best overall value. Be sure to specify the required variant when ordering to avoid disputes after delivery.
3. Check the physical specifications: Reflector size 50X50D, base E19.4, and arc gap 0.8mm must match the original lamp exactly. If any specification differs, the lamp may not fit or may not light.

V. How to Choose Between Zorsika PRO and Other Alternatives

Zorsika PRO series projector lamps follow the principle of "OEM specifications and in-house quality control": critical specifications are benchmarked item by item against the OEM originals, every lamp is tested to confirm that it lights correctly before shipment, and each unit is ready for use after installation without requiring structural modifications.

OEM parts provide exact consistency but come at a higher overall cost. Other replacement parts are cheaper, but their arc tube sourcing and quality control are inconsistent. Common problems include low brightness, a green color cast, and noticeable lumen depreciation after extended use. Zorsika takes a middle path: OEM-matched specifications, in-house quality control, and a more worry-free overall experience.

Brightness and service life are strongly affected by the projector condition, operating environment, and cooling conditions. Zorsika does not make a blanket numerical performance guarantee; before a bulk purchase, test one or two lamps to confirm that they light correctly.

VI. Frequently Asked Questions

Question: My projector is not included in the three-model list. Can I use 003-120707-01?

Answer: This is a list of verified models, not an exhaustive list. Christie projectors from the same generation often share the same lamp module. Send photos of the projector nameplate and original lamp label to Zorsika technical support, and we can help confirm compatibility.

Question: How should I choose between an OEM packaged lamp, an OEM bare lamp, and an aftermarket replacement?

Answer: If you prioritize brightness consistency and long-term reliability, choose a Zorsika PRO series lamp. Each lamp is matched item by item to OEM specifications and tested to confirm that it lights correctly before shipment, with performance benchmarked against OEM lamps, a more worry-free overall experience, and a 180-day warranty. The PRO series is also a more hassle-free choice for routine commercial and educational applications, including meeting rooms. Other replacement lamps cost less, but differences in arc tube sourcing and quality control create greater risks of brightness depreciation and shorter service life; they are recommended only for temporary backup projectors.

Question: Why choose Zorsika PRO instead of an OEM lamp?

Answer: The core principle of the Zorsika PRO series is "OEM specifications and in-house quality control": wattage, arc gap, and reflector size are benchmarked item by item against OEM specifications, with an additional individual lighting test before shipment and a 180-day warranty. Compared with OEM parts, it offers a more worry-free overall experience; compared with other alternatives, it provides more consistent quality control.

Question: What should I do if the projector reports that the lamp is not recognized after replacement?

Answer: First confirm that the lamp timer has been reset. Most such messages are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support. We provide reset instructions and troubleshooting guidance for the corresponding projector model.

Question: How long is the lamp warranty?

Answer: Zorsika PRO series projector lamps come with a 180-day warranty. After-sales service is available for normal use without accidental damage, such as a shattered lamp or abnormal early lumen depreciation. Brightness decline within the standard range is considered normal wear and is not covered by the warranty.

Related Search Tools

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Catalog