Christie 03-000649-01P Projector Lamp: VIVID LX26 VIVID LX35 VIVID LW25 VIVID LW25U LW25 LW25U LW26

03-000649-01P is a lamp module that remains widely used in Christie projectors, covering 7 models. This article presents the lamp module specifications, compatibility assessment, model compatibility list, and pre-replacement checks in one place.

I. Lamp Module Specifications

These specifications are from the Zorsika product database. Contact our sales team for the complete technical specification sheet.

II. Can It Serve as a Substitute? Check These Three Physical Parameters First

The core specifications recorded for this lamp are: power 200W, reflector size 80X80L, and arc gap 1.3mm. Whether it can serve as a substitute depends on whether these parameters match those of the original lamp. Power determines whether the lamp driver can operate it, reflector size determines whether it fits in the lamp housing, and the lamp socket and arc gap determine whether it will light.

Same wattage does not mean universal compatibility. Many lamps on the market have the same wattage but differ in reflector size by several millimeters. Forced installation may prevent the lamp housing cover from closing, shift the optical axis, or obstruct the cooling airflow. Conversely, even when the reflector size is the same, a lamp with different power may cause the driver to report an error or fail to light. The correct assessment order is to first match the OEM lamp module model, then verify the wattage and reflector size, and finally check the socket type.

This lamp is used in models with LCD panels. Different panel technologies have different optical-path requirements for the lamp arc position. Even if a substitute designed for another panel technology fits, it may produce uneven brightness distribution and is not recommended.

III. Compatible Models (7 Models, Christie)

The following compatible projector models for 03-000649-01P have been verified in Christie projectors:

VIVID LX26, VIVID LX35, VIVID LW25, VIVID LW25U, LW25, LW25U, LW26

This list contains verified models and is not exhaustive. Projectors from the same generation often share the same lamp module. For models not listed, send us photos of the projector nameplate and original lamp label for confirmation.

IV. Three Checks Before Replacement

1. Check the nameplate model: Open the lamp door and verify that the model on the lamp module label exactly matches 03-000649-01P. Some Christie models carry suffixes such as -V and +. Lamp modules are generally interchangeable, but if you are uncertain, send us photos of the nameplate for confirmation.
2. Confirm the lamp configuration: The same model is available in four configurations: OEM-packaged, OEM bare lamp, aftermarket replacement, and used. The differences are substantial. An OEM bare lamp pairs an OEM arc tube with a third-party lamp holder and generally offers the best overall value. Clearly specify the required configuration when placing your order to avoid disputes after delivery.
3. Check the physical specifications: Reflector size 80X80L, arc gap 1.3mm, and the other specifications must match those of the original lamp. If any specification differs, the lamp may not fit or may fail to light.

V. Choosing Between Zorsika PRO and Other Alternatives

Zorsika PRO Series projector lamps offer “OEM specifications and in-house quality control”: key parameters are benchmarked against the OEM specifications item by item, every lamp is tested to light before shipment, and each lamp is ready to install without structural modifications.

OEM parts offer exact compatibility, but at the cost of a higher total price. Other alternatives are cheaper, but their arc tube sourcing and quality control are inconsistent. Common problems include low brightness, a green color temperature, and noticeable brightness depreciation after use. Zorsika takes a middle path, matching OEM specifications, maintaining in-house quality control, and providing a more hassle-free overall solution.

Brightness and service life are strongly affected by projector condition, operating environment, and cooling conditions. Zorsika does not make blanket numerical performance claims, so we recommend testing one or two lamps before placing a bulk order.

VI. Frequently Asked Questions

Q: My projector is not among the 7 models listed. Can I use 03-000649-01P?

A: This list contains verified models and is not exhaustive. Christie products from the same generation often share the same lamp module. Send photos of the projector nameplate and original lamp label to Zorsika Technical Support, and we can help determine whether it is compatible.

Q: How should I choose between an OEM-packaged lamp, an OEM bare lamp, and an aftermarket replacement?

A: If stable brightness and long-term reliability are your priorities, choose a Zorsika PRO Series lamp. Each lamp is matched item by item against the OEM specifications, tested to light before shipment, and benchmarked against the OEM in performance, providing a more hassle-free overall solution while including a 180-day warranty. For routine business and education applications and conference rooms, the PRO Series is also a more hassle-free choice overall. Other replacement lamps cost less, but their arc tube sourcing and quality control vary considerably, creating greater risks of brightness depreciation and shortened service life. They are recommended only for temporary backup projectors.

Q: Why choose Zorsika PRO instead of an OEM lamp?

A: The core proposition of the Zorsika PRO Series is “OEM specifications and in-house quality control.” Power, arc gap, and reflector size are benchmarked against the OEM specifications item by item, with an additional unit-by-unit light-up test before shipment and a 180-day warranty. It provides a more hassle-free overall solution than OEM lamps and more consistent quality control than other alternatives.

Q: What should I do if the projector reports that the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset, as most such messages result from an uncleared timer. If the error persists after resetting, contact Zorsika Technical Support. We provide reset instructions and troubleshooting guidance for the corresponding projector model.

Q: How long is the lamp warranty?

A: Zorsika PRO Series projector lamps include a 180-day warranty. After-sales service is available for normal use without physical damage, such as lamp rupture or early abnormal brightness depreciation. Brightness decline within the standard range is considered normal wear and is not covered by the warranty.

Related Search Tools

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database