Christie 03-000708-01P Projector Lamp for LX65 | OEM Replacement

03-000708-01P is a lamp module still widely used in Christie projectors and is compatible with 1 model. This guide brings together the module specifications, replacement compatibility criteria, compatible model list, and key checks to perform before replacement.

1. Lamp Module Specifications

These specifications are taken from the Zorsika product database. For the complete technical specification sheet, please contact our sales team.

2. Can It Serve as a Substitute? Check These Three Physical Specifications First

The key catalogued specifications for this lamp are: wattage 250W, reflector size 80X80L, and arc gap 1.35mm. Whether the lamp can serve as a substitute depends on whether these three or four specifications match those of the original lamp item by item—wattage determines whether the lamp driver board can drive it, reflector size determines whether it fits in the lamp housing, and the socket and arc gap determine whether it will light.

Identical wattage does not mean universal compatibility. Many models on the market have the same wattage but reflector sizes that differ by several millimeters. Forcing the lamp to fit can prevent the housing cover from closing, shift the optical axis, and block cooling airflow. Conversely, if the reflector size is the same but the wattage differs, the lamp driver board may report an error or fail to light. The correct checking order is to verify the OEM lamp module model first, then check the wattage and reflector size, and finally check the socket configuration.

This lamp is used in models with LCD panels. Different panel technologies have different optical-path requirements for the lamp arc position. Even if a lamp designed for a different panel technology fits physically, it may produce uneven brightness, so cross-panel substitution is not recommended.

3. Compatible Models (1 model, Christie)

The following compatible projector models have been verified for 03-000708-01P in Christie projectors:

LX65

This list contains verified models and is not exhaustive. Projectors from the same generation often share the same lamp module. For a model not on the list, send us photos of the projector nameplate and original lamp label for confirmation.

4. Three Checks Before Replacement

1. Verify the nameplate model: Open the lamp door and confirm that the model on the lamp module label exactly matches 03-000708-01P. Some Christie models have suffixes such as -V and +, and lamp modules are generally interchangeable. When in doubt, send us a photo of the nameplate for more reliable confirmation.
2. Confirm the lamp configuration: The same model is available in four forms: a packaged OEM lamp, a bare OEM lamp, a compatible replacement, or a used lamp. The differences can be substantial. A bare OEM lamp pairs an OEM arc tube with a third-party holder and generally offers the best overall value. Be sure to specify the required option when ordering to avoid disputes after delivery.
3. Verify the physical specifications: The reflector size 80X80L and arc gap 1.35mm must match those of the original lamp. Any mismatch may prevent the lamp from fitting or lighting properly.

5. Choosing Between Zorsika PRO and Common Alternatives

Zorsika PRO Series projector lamps are built on the principle of “OEM-matching specifications and in-house quality control”: key parameters are matched item by item against the OEM originals, every lamp is individually tested to confirm that it lights properly before shipment, and the lamps are ready for use after installation without any structural modifications.

OEM parts offer perfect consistency, but come at a higher overall cost. Other replacement parts cost less, but their arc tube sourcing and quality control can be inconsistent. Common problems include low brightness, a green color cast, and noticeable brightness loss after a period of use. Zorsika takes the middle path: OEM-matching specifications, in-house quality control, and a more hassle-free overall experience.

Brightness and service life vary significantly depending on projector condition, operating environment, and cooling conditions. Zorsika does not make blanket numerical claims; before a bulk purchase, we recommend testing one or two lamps to confirm that they light properly.

6. FAQ

Q: My projector is not on the list, which contains only 1 model. Can I use 03-000708-01P?

A: This list contains models that have been verified and does not represent the full range. Christie products from the same generation often share the same lamp module. Send photos of the projector nameplate and original lamp label to Zorsika technical support, and we can help confirm whether it is compatible.

Q: How do I choose between a packaged OEM lamp, a bare OEM lamp, and a compatible replacement?

A: If you prioritize stable brightness and long-term reliability, a Zorsika PRO Series lamp is the best choice. Every lamp matches OEM specifications item by item and is tested to confirm proper illumination before shipment, providing OEM-benchmark performance, a more hassle-free overall experience, and a warranty period of 180 days. For routine commercial and educational applications and meeting rooms, the PRO Series is also the more hassle-free option. Other replacement lamps cost less, but their arc tube sources and quality control vary considerably, creating a higher risk of brightness depreciation and shortened service life. We recommend using them only in temporary backup projectors.

Q: Why choose Zorsika PRO instead of an OEM lamp?

A: Zorsika PRO Series projector lamps are based on “OEM specifications and in-house quality control”: wattage, arc gap, and reflector size are matched item by item to the OEM originals. Before shipment, every lamp also receives an individual illumination test, and the warranty period is 180 days. Compared with OEM parts, they offer a more hassle-free overall experience; compared with other alternatives, they provide more consistent quality control.

Q: What should I do if the projector reports that the lamp is not recognized after replacement?

A: First, verify whether the lamp-hour counter has been reset. Most such messages are caused by the timer not being reset. If the error persists after the reset, contact Zorsika technical support. We provide reset instructions and troubleshooting guidance for the corresponding projector model.

Q: How long is the lamp warranty?

A: The warranty period for Zorsika PRO Series projector lamps is 180 days. Normal use without accidental damage—such as a shattered lamp or abnormal early lumen depreciation—is eligible for after-sales service. Brightness depreciation within the standard range is normal wear and is not covered by the warranty.

Related Resources

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database