At a glance
- Zorsika WA100 Lens Specification Table
- Zorsika WA100 Projector Lens Parameters
- Zorsika WA100 Why This Lens Continuously Attracts Buyer Attention
- Key Points to Avoid in Selection and Installation
- Additional Notes on Zorsika WA100
- Related Reading:
- FAQ — Zorsika WA100 Frequently Asked Questions
- Q: What does the throw ratio of the Zorsika WA100 lens mean?
- Q: Which projector models are compatible with the Zorsika WA100 lens?
- Q: What does the MTF (Modulation Transfer Function) of the lens represent?
- Q: Does the lens require re-calibration after installation?
- Q: Does the Zorsika WA100 lens support 4K projection?
- Q: What is the installation method for the Zorsika WA100 lens?
- Purchase Inquiry
- Data Source Disclaimer
Zorsika WA100 is an Optoma projector compatible lens, applicable to 6 models, customized according to original specifications, and can be directly replaced and installed.
Zorsika WA100 Ultra-Short Throw Projector Lens — 6...
Zorsika WA100 Lens Specification Table
| Specification Item | Parameter |
|---|---|
| Brand | Zorsika |
| Zorsika Model | WA100 |
| Throw Ratio | 0.75:1 |
| F-Number / Focal Length | 2.5 |
| Recommended Screen Size (Inches) | 600 |
| MTF (Modulation Transfer Function) | >60% @70lp/mm |
| Lens Dimensions | φ95.7*234.72 |
| Resolution | 4K |
| Horizontal Lens Shift | 21.00% |
| Vertical Lens Shift | 8.20% |
This article is a complete selection guide for the Zorsika WA100 projector lens, covering 6 compatible Optoma (Optoma) models, full specifications (throw ratio, MTF, F-number, lens construction), a comparison table of overall specifications for each projector model when equipped with this lens, key points to avoid in selection and installation, and frequently asked questions. For other lens models, please visit the Zorsika official website www.zorsika.com.
Zorsika WA100 Projector Lens Parameters
Zorsika WA100 Why This Lens Continuously Attracts Buyer Attention
The Zorsika WA100 is compatible with mainstream Optoma projector models. The most common issues buyers face during selection are: high original lens prices, unstable supply cycles; inconsistent quality of third-party lenses, and MTF/resolution not meeting standards. Zorsika addresses this pain point by offering a replacement lens solution with the same specifications as the original, all of which undergo optical testing and are covered by a free replacement warranty within the warranty period for non-human damage.
Key Points to Avoid in Selection and Installation
- Confirm Throw Ratio and Installation Distance — Calculate the required throw ratio based on room depth and target screen size. The optimal installation distance for an ultra-short throw lens is 1-2 meters to project a 100-inch screen;
- Check Lens Shift Range — Before installation, ensure the projector's horizontal/vertical lens shift margin to avoid image overflow or inability to center the image;
- Confirm Lens Mount Compatibility — The Zorsika WA100 lens uses the standard lens mount for Optoma projectors. Before purchasing, please confirm with your sales representative that your projector model is on the compatibility list.
Additional Notes on Zorsika WA100
As a lens for Zorsika projectors (Zorsika projector lens), the Zorsika WA100 is compatible with 6 Optoma projector models. The lens is a precision optical component and plays a key role in the optical system of a projector for light path transmission and image formation. All lenses provided by Zorsika undergo MTF testing (modulation transfer function test) and focus precision calibration to ensure the full presentation of 4K resolution (4K resolution). To view lenses of other brands or focal lengths, please visit www.zorsika.com.
Related Reading:
Optoma WA100 Lens Compatible Projector Models (6 Models)
| Projector Model | Resolution | Brightness | Lens Zoom Ratio |
|---|---|---|---|
| ZU1700 | WUXGA,1920 x 1200 | 17000 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| ZU2200 | WUXGA,1920 x 1200 | 25000 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| ZU1900 | WUXGA,1920 x 1200 | 19000 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| MEU962 | WUXGA,1920 x 1200 | 25000 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| CUL20K | WUXGA,1920 x 1200 | 25000 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| CUL25K | WUXGA,1920 x 1200 | 25000 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
FAQ — Zorsika WA100 Frequently Asked Questions
Q: What does the throw ratio of the Zorsika WA100 lens mean?
A: Throw ratio = Projection distance / Screen width. The smaller the ratio, the larger the screen projected from the same distance. It is recommended to calculate the achievable screen size based on the installation distance, or consult Zorsika sales for selection calculations.
Q: Which projector models are compatible with the Zorsika WA100 lens?
A: The Zorsika WA100 lens is compatible with 6 Optoma projector models. For details, refer to the "Compatible Projector Models" table in this article. To confirm if a specific model is compatible, please contact Zorsika sales with a photo of the projector's nameplate; we will check the lens-body match for you.
Q: What does the MTF (Modulation Transfer Function) of the lens represent?
A: MTF (Modulation Transfer Function) reflects the lens's ability to reproduce details; the higher the value, the sharper the image. Professional projection lenses generally require MTF >50% @93lp/mm. The MTF specification of the Zorsika WA100 lens is >60% @93lp/mm. In 4K projection applications, MTF is a core indicator for determining whether the lens truly supports 4K resolution.
Q: Does the lens require re-calibration after installation?
A: No — the mount is identical to the original. After installation, only fine-tuning of focus and zoom is needed based on the actual projection distance. If image abnormalities occur (black borders/light leaks/out of focus), first check if the lens is fully seated in the mount, then confirm compatibility between the projector firmware version and the lens.
Q: Does the Zorsika WA100 lens support 4K projection?
A: Yes. The Zorsika WA100 lens has an MTF specification >60% @93lp/mm, meeting the 4K resolution standard (≥60% @93lp/mm). When used with the 4K projector, it can deliver a full 4K image.
Q: What is the installation method for the Zorsika WA100 lens?
A: The Zorsika WA100 lens uses the standard lens mount for Optoma projectors. Insert it into the lens compartment and rotate clockwise to lock — the process takes about 30 seconds. For on-site installation support, contact a Zorsika sales engineer for field service.
Purchase Inquiry
For information on the specific configuration, price, inventory, or alternative solutions for the Zorsika WA100 lens, please contact the Zorsika sales team. We provide 1-on-1 selection consultation, technical parameter comparison, and on-site installation support.
Official Website: www.zorsika.com
Tel: 020-38551187
Email: sales@zorsika.com
Working Hours: Monday to Saturday 9:00-18:00, with a response within 24 hours (Optoma Official Technical Documentation)
Data Source Disclaimer
All lens models, specifications, and compatible projector models in this article are sourced from:
- zorsika.com official product pages
- Zorsika database