Panasonic ET-LAL500 Lamp Quick Reference: Specs + 83 Compatible Models Overview

Specifications Overview

The above parameters are sourced from Zorsika's product database. For complete technical datasheets, please contact your sales representative.

Compatible Projector Models: 83 Panasonic Projectors

Below is the verified model compatibility list for ET-LAL500 in Panasonic projectors, with models separated by commas:

PT-X416C, PT-LB353, PT-UX385C, PT-UX335C, PT-LB383, PT-LB303, PT-X3530STC, PT-UW332C, PT-X336C, PT-TX210, PT-UX334C, PT-TW250, PT-WX3300, PT-TW340, PT-TX400, PT-TX312, PT-TW341R, PT-X382C, PT-LB300, PT-LW362, PT-LW312, PT-X412C, PT-X3231STC, PT-WW3200, PT-X316C, PT-WX3900, PT-UW363C, PT-XW331C, PT-TX402, PT-XW3333STC, PT-X3233STC, PT-X3833STC, PT-X331C, PT-XW3232STC, PT-X361C(RFL310), PT-X2730STC, PT-XW2731STC, PT-UW313C, PT-X3230STC, PT-UX413C, PT-TX310, PT-LB412, PT-WX3700, PT-UX383C, PT-UX283C, PT-LB382, PT-LB332, PT-LW280, PT-LW330, PT-LB360, PT-LB330, PT-LB280, PT-TW342, PT-TW343R, PT-UX315C, PT-UW282C, PT-UX363C, PT-WX4200, PT-WX3400, PT-XW3360STC, PT-WW3100, PT-X338C, PT-XW318C, PT-UX333C, PT-UX415C, PT-LW373, PT-LB423, PT-LW333, PT-UW317C, PT-X3861STC, PT-X3261STC, PT-XW281C, PT-XW312C, PT-XW362C, PT-X330C, PT-X332C, PT-X303C, PT-X281C, PT-X386C, PT-UX326C, PT-X3260STC, PT-XW366C, PT-UW365C

Among these, the 13 models with the ST suffix are short-throw models (PT-X3530STC, PT-X3231STC, PT-XW3333STC, PT-X3233STC, PT-X3833STC, PT-XW3232STC, PT-X2730STC, PT-XW2731STC, PT-X3230STC, PT-XW3360STC, PT-X3861STC, PT-X3261STC, PT-X3260STC). These machines are typically installed very close to the screen with relatively tight heat dissipation space and higher lamp operating temperatures. It is recommended to shorten the dust cleaning and inspection cycles.

What Zorsika PRO Series Gives You

For high-volume standard lamp modules like ET-LAL500, Zorsika PRO Series delivers OEM-spec replacement solutions—power output, arc gap, and reflector size all matched to original specs, with each unit individually tested before shipping. Ready to install with no modifications required.

• Spec-Matched: Power output, arc gap, and reflector size matched to OEM specifications item by item
• Unit Testing: Every lamp tested before shipping for guaranteed brightness and stability
• Warranty: 180-day lamp warranty with after-sales service for non-human damage under normal use
• Stable Supply: Regular models kept in stock, same-day shipment available for urgent orders

In short: Zorsika PRO Series projector lamps are built for those who want OEM quality without the OEM price tag.

Note: Brightness, lifespan, and other performance metrics vary significantly depending on machine condition, usage environment, and cooling conditions. Zorsika does not provide uniform performance guarantees—we recommend ordering 1-2 sample units for testing before bulk purchase.

Common Questions

Q: Why choose Zorsika PRO over OEM or budget alternatives?

A: Zorsika PRO Series lamps operate on an "OEM specs, self-controlled quality" model: matching OEM power output, arc gap, and reflector size, with the added step of individual testing before shipping and a 180-day warranty. More competitive pricing than OEM, more consistent quality than budget alternatives.

Q: How to choose between OEM sealed, OEM bare, or third-party compatible?

A: For stable brightness and long-term reliability, Zorsika PRO Series is the top choice—OEM-spec matching, individual pre-shipment testing, OEM-level performance at better pricing, plus 180-day warranty. For standard business, education, or meeting room use, PRO Series offers superior value compared to OEM sealed options. While OEM bare and third-party compatible lamps are cheaper, their lamp core sourcing and quality control vary significantly, carrying higher risks of brightness degradation and shorter lifespan—only recommended for temporary backup use.

Q: What to do if the machine shows "lamp not recognized" after replacement?

A: First verify whether lamp timer reset was performed—most errors stem from uncleared timers. If errors persist after reset, contact Zorsika technical support for model-specific reset procedures and troubleshooting guidance.

Q: My machine isn't on the 83-model list above. Can I still use ET-LAL500?

A: The list represents verified models, not an exhaustive inventory. Panasonic products from the same generation often share lamp modules. Send photos of your machine's nameplate and original lamp label to Zorsika technical support for compatibility confirmation.

Q: Are installation tutorials available for ET-LAL500?

A: Yes. These Panasonic models share similar lamp door positions and removal procedures. Contact Zorsika sales for model-specific illustrated or video tutorials.

Three Points to Verify Before Purchase

1. Verify Nameplate Model: Open the projector lamp door—the model on the lamp module label should exactly match ET-LAL500. Some Panasonic models may have suffix variations like -V or +, but the lamp modules are generally interchangeable. Send a nameplate photo to Zorsika technical support if unsure.
2. Confirm Lamp Type: The same model is available in OEM sealed, OEM bare, compatible, and second-hand options with significant price differences. OEM bare provides OEM lamp cores with third-party housings, typically offering the best value. Clearly specify the desired type in your order to avoid disputes upon delivery.
3. Verify Physical Specs: Reflector size 50X50L and arc gap must match the original lamp. Any mismatch may result in installation failure or failure to ignite.

Important Notes After Lamp Replacement

• Clean Dust Promptly: Dust buildup on air intakes and filters raises lamp operating temperature. Clean monthly or bi-monthly in dusty environments, or every 3-6 months in standard office settings.
• Use Eco Mode: Enable eco mode when brightness requirements are met to reduce lamp thermal load.
• Avoid Frequent Switching: Thermal cycling is a major cause of lamp degradation. Use the shutter/blank function instead of repeatedly turning the projector on and off when temporarily not in use.
• Proper Shutdown: Wait for fans to stop before cutting power. Shutting down while hot causes abrupt cooling—one of the most common causes of lamp failure.
• Reset Timer After Replacement: Always reset the lamp timer in the menu after installing a new lamp, or the machine will continue alerting based on old timer data.

Related Resources

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Catalog

Procurement Inquiry

For quotations, bulk pricing, or complete model compatibility lists for Panasonic ET-LAL500, contact us through:

• Website: www.zorsika.com
• Phone: 020-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and model compatibility data in this article are sourced from Zorsika's product database. The data is continuously updated and subject to the actual quotation confirmation.