Christie 003-100857-01 Projector Lamp Quick Selection: 10 Models & Specs

Lamp Module Specifications

The above parameters are sourced from the Zorsika product database. For complete technical specifications, please contact your sales representative.

Compatible Models: 10 Christie Projector Models

The following are verified compatible models for 003-100857-01 in Christie projectors, with model numbers separated by commas:

DS+10K-M, Roadster WU12K-M, Roadster S+10K-M, Roadster HD10K-M, Mirage HD10K-M, Mirage WU12K-M, Mirage DS+10K-M, HD10K-M, WU12K-M, WX10K-M

Among them, the 3 models with ST suffix are short-throw models (Roadster WU12K-M, Roadster S+10K-M, Roadster HD10K-M). These machines are typically installed very close to the screen, with relatively limited clearance for heat dissipation and higher lamp operating temperatures. It is recommended to shorten the cleaning and inspection cycles.

Frequently Asked Questions

Q: Why choose Zorsika PRO over OEM or budget third-party lamps?

A: The core principle of Zorsika PRO series lamps is "OEM specs, independent quality control": wattage, arc gap, and reflector size are matched item by item to OEM standards, plus each lamp undergoes individual testing before shipping, with a 180-day warranty. Compared to OEM, it's more worry-free overall; compared to budget third-party options, the quality control is more consistent.

Q: How to choose between original packaged, original bare, and compatible?

A: If you prioritize brightness stability and long-term reliability, Zorsika PRO series is the top choice—OEM-matched specs, individual pre-shipment testing, OEM-level performance with worry-free convenience overall, and a 180-day warranty. For standard business, education, and meeting room use, PRO series is also the most worry-free option. Original bare and compatible options have significant variations in arc tube sources and quality control, with higher risks of brightness degradation and shortened lifespan—they are only recommended as temporary backup.

Q: What should I do if the machine shows "lamp not recognized" after replacement?

A: First, check whether you reset the lamp timer. Most errors are caused by uncleared timers. If the error persists after resetting, contact Zorsika technical support—we provide reset methods and troubleshooting guides for specific models.

Q: My machine is not on the list of 10 models above. Can I use 003-100857-01?

A: The list represents verified models, not an exhaustive catalog. Christie models from the same generation frequently share compatible lamp modules. Send a photo of the machine nameplate and original lamp label to Zorsika technical support to confirm compatibility.

Q: Is there an installation guide for 003-100857-01?

A: Yes. These Christie models share similar lamp door locations and disassembly procedures. Contact Zorsika sales to get illustrated or video tutorials for your specific model.

Smart Purchasing: 3 Key Verification Steps

1. Verify nameplate model: Open the projector lamp door—the model on the lamp module label should exactly match 003-100857-01. Some Christie models have suffix variations like -V or +, but lamp modules are typically interchangeable. When unsure, photograph the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm lamp form: The same model comes in four forms: original packaged, original bare, compatible, and used. The differences between these four forms are significant. Original bare uses an OEM arc tube with a third-party housing, typically offering the best overall value. When purchasing, be sure to clearly specify which form you want on the order to avoid disputes upon receipt.
3. Check physical specifications: Reflector size 56X56D, socket E21.8, and arc gap must match the original lamp. Any mismatch may result in inability to install or failure to ignite.

Important Notes After Lamp Replacement

• Clean dust promptly: Dust accumulation on air intakes and filters directly raises lamp operating temperature. Clean every 1-2 months in dusty environments and every 3-6 months in standard office environments.
• Use eco mode wisely: Prioritize eco mode when brightness levels are sufficient, as it reduces lamp thermal load.
• Avoid frequent switching: Thermal cycling is one of the main causes of lamp degradation. If not using for a short period, use the shutter/blank function rather than repeatedly turning power on and off.
• Shutdown properly: After turning off the machine, wait until the fan stops before cutting power. Cutting power while the lamp is hot causes sudden cooling, which is a common cause of lamp failure.
• Reset after replacement: Be sure to reset the lamp timer in the menu after installing a new lamp; otherwise, the machine will continue alarming based on old operating hours.

Related Query Links

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Procurement Inquiries

For Christie 003-100857-01 solution consultation, bulk pricing, or complete compatibility list, contact us via:

• Website: www.zorsika.com
• Phone: 020-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module models, specifications, and compatibility data in this article are sourced from Zorsika's product database and are continuously updated. Please confirm with actual inquiry for accuracy.