At a glance
- Specifications
- ELPLU03 Compatible Projector Models (6 Models)
- About This OEM Lens
- Authenticity and Purchasing Information
- Frequently Asked Questions
- Q: What's the difference between an original lens and a compatible/replacement lens?
- Q: How do I confirm this lens will work on my machine?
- Q: How do I choose the right throw ratio?
- Q: How does Zorsika guarantee authenticity for ELPLU03?
- Q: What should I watch out for when replacing a lens?
- Related Search
- Procurement Inquiry
Epson genuine lens ELPLU03, Short Throw, throw ratio 0.66:1-0.80:1, compatible with EB-PU1008B, EB-PU1008W, EB-PU1006W, EB-PU1007B and other 6 Epson projectors. Genuine supply, bulk purchase available for projects.
Specifications
| Lens Model | ELPLU03 |
| Brand (Original) | Epson |
| Compatible Panel / Chip | 0.76 panel |
| Throw Ratio | 0.66:1-0.80:1 |
| Product Type | Short Throw |
| Number of Compatible Models | 6 models |
The above parameters are sourced from original factory data and Zorsika's product database; for complete technical specifications, please contact your sales representative.
ELPLU03 Compatible Projector Models (6 Models)
Below are the verified compatible projector models for ELPLU03, separated by commas:
EB-PU1008B, EB-PU1008W, EB-PU1006W, EB-PU1007B, EB-PU1007W, EB-L1715S
Note: Lens compatibility is determined by the projector's lens mount interface and panel/chip size. For models not listed, please contact Zorsika technical support for confirmation.
About This OEM Lens
ELPLU03 is an Epson OEM short throw lens, with optical construction, lens coating, and chassis tolerances all matching original machine standards for plug-and-play installation and stable imaging performance. For installation environments with limited projection distance (such as short-throw large image projection, ultra-short throw near-wall setups), selecting the correct throw ratio is more critical than choosing a general-purpose lens.
This lens has a throw ratio of 0.66:1-0.80:1. Throw ratio = projection distance ÷ screen width: a smaller value produces a larger image (suitable for close-range and small spaces), while a larger value requires greater installation distance. Calculate the required throw ratio range based on your on-site installation distance and screen size, then match it to this model.
Authenticity and Purchasing Information
Zorsika provides genuine Epson OEM lens ELPLU03 through authorized channels, complete with original packaging and verifiable serial numbers, suitable for bulk procurement and project supply in engineering projection, conference rooms, classrooms, and similar applications.
- Authenticity Guarantee: Authorized factory channels; batch projects may request factory channel documentation to ensure no refurbished or counterfeit products.
- Compatibility Verification: Provide your projector model before ordering so Zorsika technical team can verify against the compatible model list above to avoid installation issues.
- Project Supply: ELPLU03 covers 6 models; common projects can be scheduled in advance to shorten delivery time.
- Alternative Options: If budget is a concern, Zorsika also offers equivalent-spec alternative lenses with key parameters matching OEM standards for flexible selection.
Note: Actual imaging performance depends on projector condition and installation environment; it is recommended to test one unit before placing bulk orders.
Frequently Asked Questions
Q: What's the difference between an original lens and a compatible/replacement lens?
A: Original lenses are manufactured by Epson's own factory, with optical parameters, coatings, and housing tolerances strictly matched to the original machine; compatible lenses are parametric copies made by third parties, offering lower cost but with differences in image quality and lifespan. Zorsika offers both original and same-specification alternatives, allowing selection based on budget.
Q: How do I confirm this lens will work on my machine?
A: Base judgment on the machine's lens interface and panel/chip size; this article lists verified compatible models. Engineering projectors of the same generation and brand often share interfaces. If unsure, it's safer to photograph the machine nameplate and send it to Zorsika technical support for confirmation.
Q: How do I choose the right throw ratio?
A: Throw Ratio = Projection Distance ÷ Screen Width. Smaller values produce larger images (short-throw/ultra-short-throw suits small spaces at close range), while larger values require greater installation distances. Work backward from your installation distance and screen dimensions to identify the needed throw ratio range, then match it to this model's focal length specifications.
Q: How does Zorsika guarantee authenticity for ELPLU03?
A: Zorsika provides genuine factory-channel products, complete with original packaging and verifiable serial numbers; bulk project orders can request factory-channel documentation to ensure authenticity and confirm no refurbished or counterfeit units.
Q: What should I watch out for when replacing a lens?
A: Always power off and wait for the cooling fan to stop completely before disassembly/installation; handle the lens by gripping the barrel, avoiding contact with the glass; use an air blower to gently remove dust if needed; after positioning, test focus first before tightening the mounting screws, and clean the mount and contacts while you're at it.
Related Search
- Zorsika Technical Support Center
- Projector Brand & Compatible Model Search
- Projector Lamp / Lens / Air Filter Product Catalog
Procurement Inquiry
For consultations on Epson genuine lens ELPLU03 solutions, project planning, or a complete compatibility list, contact us through:
- Website: www.zorsika.com
- Phone: 020-38551187
- Email: sales@zorsika.com
- Business Hours: Monday to Friday, 9:00-18:00
Lens model and compatible projector data in this article are sourced from original manufacturer documentation and the Zorsika product database. Data is continuously updated; actual quotation confirmation should be used as the final reference.