Digital Projection 107-750 Projector Lamp Quick Selection: 18 Models & Specs

When buying a projector lamp for Digital Projection projectors, check the model number first before anything else. The specifications of the 107-750 and a quick reference of 18 compatible projector models are as follows.

Specifications at a Glance

The above specifications are sourced from the Zorsika product database. For the complete technical datasheet, please contact our sales team.

Digital Projection 107-750 Compatible Model List (18 Models Total)

Below are the verified compatible Digital Projection projector models for the 107-750, separated by commas:

iVision 30sx+ XB, iVision 30sx+ XL, iVision 30sx+ XC, iVision 30sx+ W-XB, iVision 30sx+ W-XC, iVision 30sx+ W-XL, iVision 30-1080p XB, iVision 30-1080p-XL, iVision 30-1080p-XC, iVision 30-1080p-W-XB, iVision 30-1080p-W-XC, iVision 30-WUXGA-XB, iVision 30-1080p-W-XL, iVision 30-WUXGA-XL, iVision 30-WUXGA-XC, iVision 30-WUXGA-W-XB, iVision 30-WUXGA-W-XL, iVision 30-WUXGA-W-XC

Same Specifications, Why Choose Zorsika PRO

The Zorsika PRO series offers replacement lamp modules for the 107-750 with the same specifications as the original. Key parameters are matched one-to-one against the original, supporting project supply and bulk procurement with more controllable lead times.

• Specification Matching: Power, arc gap, and reflector size are matched item by item according to original parameters
• Individual Testing: Each lamp is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on lamps; non-artificial damage during normal use is covered by after-sales service
• Stable Supply: Supports bulk procurement and project-based supply

In short: if you want original quality but with greater peace of mind overall, the Zorsika PRO series projector lamps are designed exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, operating environment, and cooling conditions. Zorsika does not make uniform numerical commitments. We recommend testing 1-2 sample units before bulk procurement.

FAQ

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamps is "original parameters, self-controlled quality": power, arc gap, and reflector size are matched item by item against the original, but with an additional individual lighting test before shipment, plus a 180-day warranty. Compared to the original, it offers greater overall peace of mind; compared to other alternatives, quality control is more consistent.

Q: How to choose between original packaged, original bare, and replacement lamps?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO series lamps are the first choice—matched item by item to original parameters, individually tested before shipment, with performance comparable to the original and greater overall peace of mind, plus a 180-day warranty. For regular commercial, educational, and conference room use, the PRO series is also the more worry-free option. While other replacement lamps are cheaper, the arc tube source and quality control vary significantly, leading to higher risks of brightness decay and shortened lifespan. They are only recommended for temporary backup units.

Q: What if the projector shows "lamp not recognized" after replacement?

A: First, confirm whether the lamp hour reset has been performed. Most alerts are caused by the timer not being reset. If the error persists after resetting, contact Zorsika technical support—we provide reset instructions and troubleshooting guidance for the corresponding models.

Q: My projector is not on the 18-model list above. Can I use the 107-750?

A: The list covers verified models but is not exhaustive. Digital Projection projectors of the same generation often share lamp modules. Take photos of the projector nameplate and the original lamp label and send them to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation tutorial for the 107-750?

A: Yes. The lamp door location and disassembly/assembly steps for these Digital Projection models are basically the same. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding models.

Procurement Pitfall Avoidance: Three Key Checks

1. Verify the Nameplate Model: Open the projector lamp door and confirm the model on the lamp module label matches 107-750 exactly. Some Digital Projection models may have suffixes like -V, +, etc., but the lamp modules are usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the Lamp Form: The same model comes in four forms—original packaged, original bare, replacement, and used—which differ significantly. Original bare means an original arc tube with a third-party lamp housing, typically offering the best overall cost-performance. Be sure to specify clearly on the order which form you want to avoid disputes upon delivery.
3. Verify Physical Specifications: Reflector size 56X56D, socket E21.8, and arc gap must match the original lamp. If any of these do not align, the lamp may not fit or may fail to light.

After Replacing the Lamp, Keep These Points in Mind

• Clean Dust Regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use Eco Mode Wisely: This lamp supports dual power modes of 300W / 250W. Switching to eco mode for everyday presentations can significantly reduce the lamp's thermal load.
• Avoid Frequent On/Off Cycles: Thermal cycling is one of the main causes of lamp wear. If the projector won't be used for a short period, use the shutter function instead of repeatedly cutting power.
• Shut Down Properly: After powering off, wait for the cooling fan to stop before unplugging. Cutting power while the lamp is hot causes sudden cooling, a common cause of lamp rupture.
• Reset Lamp Hours After Replacement: After installing a new lamp, be sure to reset the lamp hour counter in the menu; otherwise, the projector will continue to alert based on the old timer.

Related Search Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For solution consultation, bulk pricing, or the complete compatible model list for the Digital Projection 107-750, please contact us via the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module model, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated; please confirm with actual quotations.