Choosing Epson ELPLU04: How to Match 19 Models and Understand Throw Ratio

If you need to replace or add an original lens to your Epson installation projector, the ELPLU04 is Epson's original short throw solution, with a throw ratio of 0.62:1-0.75:1, covering 19 projector models. Below is the compatibility list, throw ratio comparison, and selection tips—check these and you can place your order directly.

Three Steps to Confirm ELPLU04 Compatibility

1. Check the mount: The ELPLU04 is an Epson original lens, with a mount that matches the projector's lens socket; projectors of the same generation and brand often share the same interface.
2. Check the panel size: Based on the projector's panel/chip size, the ELPLU04 covers 19 models (see list below); if your model isn't listed, send us the nameplate for confirmation.
3. Check the throw ratio: The ELPLU04 is a short throw lens, so especially when installation distance is limited, verify the throw ratio range to avoid not achieving the desired image size.

If all three steps match, you can install it directly; if unsure, send a photo of the nameplate to our technical team for verification to avoid returns or exchanges.

Specifications

The above specifications come from original manufacturer data and the Zorsika product database; contact sales for the full technical datasheet.

ELPLU04 Compatible Model List (19 Models Total)

Below are the verified compatible models for the ELPLU04, separated by commas:

EB-PU1008B, EB-PU1008W, EB-PU1006W, EB-PU1007B, EB-PU1007W, EB-L1715S, QL7000, QL3000, EB-PQ2213B, EB-PQ2220B, EB-PQ2216B, EB-PQ2216W, EB-PQ2010B, EB-PQ2010W, EB-PQ2008B, EB-PQ2008W, EB-PU2116W, EB-PU2120W, EB-PU2113W

Note: Lens compatibility is determined by the projector's lens mount and panel/chip size; for models not listed, contact Zorsika technical support for confirmation.

Throw Ratios of the ELPLU04 Across Different Model Series

The ELPLU04 is compatible with multiple model series. Since each series has a different panel size, the throw ratio of the same lens varies across models. When selecting, refer to the table below and use the value for your specific model:

Note: Throw ratio = projection distance ÷ image width. If your model isn't listed above, or you need to calculate the image size based on your actual installation distance, contact Zorsika technical support for assistance.

How Good Is This Lens?

The ELPLU04 is an Epson original short throw lens, with lens coating, optical structure, and body tolerances all built to original standards—install and it works, with stable imaging. For projects with tight installation constraints (large images from short distances, wall-mounted ultra-short throw), choosing the right throw ratio is more critical than blindly using a universal lens.

Its throw ratio is 0.62:1-0.75:1. Remember this: throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (ideal for small spaces); the larger the value, the farther you need to be. Work backward from your site distance and screen size to find the range, and match it against this model.

FAQ

Q: Which models is the ELPLU04 compatible with? How do I check if my projector is on the list?

A: This article lists the verified compatible models (including installation projectors and their corresponding series). When checking, rely on the projector's lens mount and panel/chip size; projectors of the same generation and brand often share the same interface. If unsure, take a photo of the nameplate and send it to Zorsika technical support for the most reliable confirmation.

Q: Should I choose the original or a Zorsika replacement lens?

A: The original is manufactured by Epson, with parameters and body tolerances calibrated to original standards, making it suitable for projects with strict requirements for original consistency. The Zorsika replacement lens is independently designed to the same specifications, with throw ratio, image circle, and mount matched to the original, offering better budget and lead time. Both options are available—choose based on your project requirements.

Q: How exactly do I calculate and choose the throw ratio?

A: Throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (short throw/ultra-short throw suits close-range, small spaces); the larger the value, the greater the installation distance needed. Work backward from your installation distance and screen size to determine the required throw ratio range, and match it to this model's focal range.

Q: How can I ensure the ELPLU04 I purchase is genuine?

A: Zorsika sources genuine products through official channels, with original packaging and serial numbers for verification; for bulk projects, channel documentation can be provided to eliminate refurbished or unverified sources.

Q: What should I pay attention to when replacing the lens?

A: Turn off the projector and wait for the fan to stop before disassembly; hold the lens barrel without touching the glass, and use a blower for dust; after installation, test focus first before tightening, and clean the mount and contacts along the way.

Genuine Product and Procurement Information

Zorsika supplies the Epson original lens ELPLU04 through official channels, with original packaging and serial numbers for verification, suitable for bulk procurement and project supply for installation projectors, conference rooms, classrooms, and more.

• Genuine guarantee: Official original channels, with original packaging and serial numbers; channel documentation can be provided for bulk projects to eliminate refurbished or unverified sources.
• Compatibility check: Provide the projector model before ordering, and Zorsika technical support will verify against the compatible model list above to avoid installation issues.
• Project supply: The ELPLU04 covers 19 models, and common projects can be scheduled in advance to shorten lead times.
• Replacement option: If budget is a concern, Zorsika can also provide a replacement lens with the same specifications, with key parameters matched to the original—choose as needed.

Note: Actual imaging performance depends on projector condition and installation environment; for large quantities, it's recommended to test one unit first.

Related Inquiry Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For consultation on the Epson original lens ELPLU04, project solutions, or the full compatible model list, contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lens model and compatible model data in this article come from original manufacturer sources and the Zorsika product database; data is continuously updated, and final confirmation is based on actual inquiries.