Epson ELPLL08 Original Lens: Compatibility List and Installation Tips

If your Epson installation projector needs a replacement or additional original lens, the ELPLL08 is Epson's original long throw solution with a throw ratio of 5.09:1-7.16:1, covering 19 compatible models. Below is the compatibility list, throw ratio comparison, and selection tips you need—check them against your unit and you're ready to order.

Three Steps to Confirm ELPLL08 Compatibility

1. Check the mount: The ELPLL08 is an Epson original lens with a mount that matches the projector's lens socket; projectors from the same generation and brand often share the same interface.
2. Check the panel size: Use the projector's panel/chip size as the reference. The ELPLL08 covers 19 models (see list below); if your model isn't listed, send us the nameplate for confirmation.
3. Check the throw ratio: The ELPLL08 is a long throw lens, so verify the throw ratio range especially when installation distance is limited, to avoid not achieving the desired image size.

If all three steps match, you can install it directly; if unsure, send a photo of the nameplate to our technical team for verification to avoid returns or exchanges.

Specifications

The above specifications are sourced from original manufacturer data and the Zorsika product database; full technical datasheets are available upon request from sales.

ELPLL08 Compatible Model List (19 Models Total)

The following are verified compatible models for the ELPLL08, separated by commas:

EB-PU1008B, EB-PU1008W, EB-PU1006W, EB-PU1007B, EB-PU1007W, EB-L1715S, QL7000, QL3000, EB-PQ2213B, EB-PQ2220B, EB-PQ2216B, EB-PQ2216W, EB-PQ2010B, EB-PQ2010W, EB-PQ2008B, EB-PQ2008W, EB-PU2116W, EB-PU2120W, EB-PU2113W

Note: Lens compatibility is determined by the projector's lens mount and panel/chip size. For models not listed, contact Zorsika technical support for confirmation.

ELPLL08 Throw Ratios Across Different Model Series

The ELPLL08 works with multiple model series. Since each series has a different panel size, the same lens delivers different throw ratios on different models. When selecting, refer to the table below and use the value for your specific model:

Note: Throw ratio = projection distance ÷ image width. If your model isn't listed above, or you need to calculate the image size based on your actual installation distance, contact Zorsika technical support for assistance.

How Good Is This Lens?

The ELPLL08 is an Epson original long throw lens. Its coating, optical structure, and body tolerances are all calibrated to original factory standards, so it works right out of the box with stable imaging. For projects with tight installation constraints (large images from short distances, ultra-short-throw wall mounting), choosing the right throw ratio is more critical than blindly using a generic lens.

Its throw ratio is 5.09:1-7.16:1. Remember this: throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (ideal for small spaces); the larger the value, the farther the projector needs to be. Work backward from your installation distance and screen size to find the required range, then match it to this model.

FAQ

Q: Which models are compatible with the ELPLL08? How do I check if my projector is on the list?

A: This article lists the verified compatible models (including installation projectors and their corresponding series). When checking, use the projector's lens mount and panel/chip size as the reference; projectors from the same generation and brand often share the same interface. If unsure, take a photo of the nameplate and send it to Zorsika technical support for the most reliable confirmation.

Q: Should I choose the original or a Zorsika replacement lens?

A: The original is manufactured by Epson, with parameters and body tolerances calibrated to factory specs, making it ideal for projects with strict requirements for original consistency. Zorsika replacement lenses are independently designed to the same specifications, with throw ratio, image circle, and mount matched to the original, offering better budget and lead time. Both options are available—choose based on your project requirements.

Q: How exactly do I calculate and choose the throw ratio?

A: Throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (short-throw/ultra-short-throw suits close-range small spaces); the larger the value, the greater the installation distance required. Work backward from your installation distance and screen size to determine the required throw ratio range, then match it to this model's focal length.

Q: How can I ensure the ELPLL08 I purchase is genuine?

A: Zorsika sources genuine products through official channels, complete with original packaging and a traceable serial number. For bulk projects, channel documentation can be provided to eliminate refurbished or unverified units.

Q: What should I watch out for when replacing the lens?

A: Power off the projector and wait for the fan to stop before removing or installing. Hold the lens barrel without touching the glass, and use an air blower for dust. After installation, run a focus test before tightening, and clean the mount and contacts along the way.

Genuine Product and Procurement Information

Zorsika supplies the genuine Epson original lens ELPLL08 through official channels, complete with original packaging and a traceable serial number, suitable for bulk procurement and project supply for installation projectors, conference rooms, classrooms, and more.

• Genuine Guarantee: Sourced through official channels, with original packaging and serial number; channel documentation can be provided for bulk projects to eliminate refurbished or unverified units.
• Compatibility Verification: Provide your projector model before ordering, and Zorsika technical support will confirm against the compatibility list above to avoid installation issues.
• Project Supply: The ELPLL08 covers 19 models, and common projects can be scheduled in advance to shorten lead times.
• Replacement Option: If budget is a concern, Zorsika also offers replacement lenses with the same specifications, with key parameters matched to the original—choose as needed.

Note: Actual imaging performance is affected by projector condition and installation environment; we recommend testing one unit before a bulk order.

Related Inquiry Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For consultation on the Epson original lens ELPLL08, project proposals, or the full compatibility list, contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lens model and compatible model data in this article are sourced from original manufacturer data and the Zorsika product database. Data is continuously updated; final confirmation is subject to actual inquiry.