Epson ELPLM15 Original Lens: Compatibility List and Installation Tips

If you need to replace or add an original lens to your Epson installation projector, the ELPLM15 is Epson's original standard throw solution, with a throw ratio of 1.52:1-2.47:1, covering 19 projector models. Below is the compatibility list, throw ratio comparison, and selection tips—check these before placing your order.

Three Steps to Verify ELPLM15 Compatibility

1. Check the Mount: The ELPLM15 is an Epson original lens, with a mount that matches the projector's lens socket; projectors of the same generation and brand often share the same interface.
2. Check the Panel: Based on the projector's panel/chip size, the ELPLM15 covers 19 models (see list below); if your model is not listed, send us the nameplate photo for confirmation.
3. Check the Throw Ratio: The ELPLM15 is a standard throw lens; when installation distance is limited, always verify the throw ratio range to avoid not achieving the desired image size.

If all three steps match, you can install it directly; if unsure, send the nameplate photo to our technical team for verification to avoid returns.

Specifications

The above specifications are sourced from original manufacturer data and the Zorsika product database; full technical datasheets are available upon request from our sales team.

ELPLM15 Compatible Model List (19 Models)

The following are verified compatible models for the ELPLM15, separated by commas:

EB-PU1008B, EB-PU1008W, EB-PU1006W, EB-PU1007B, EB-PU1007W, EB-L1715S, QL7000, QL3000, EB-PQ2213B, EB-PQ2220B, EB-PQ2216B, EB-PQ2216W, EB-PQ2010B, EB-PQ2010W, EB-PQ2008B, EB-PQ2008W, EB-PU2116W, EB-PU2120W, EB-PU2113W

Note: Lens compatibility is determined by the projector's lens mount and panel/chip size; for models not listed, contact Zorsika technical support for verification.

ELPLM15 Throw Ratios Across Different Model Series

The ELPLM15 is compatible with multiple model series. Since each series has different panel sizes, the same lens will have different throw ratios on different models. When selecting, refer to the table below based on your specific model:

Note: Throw ratio = projection distance ÷ image width. If your model is not listed above, or if you need to calculate image size based on actual installation distance, contact Zorsika technical support for assistance.

How Good Is This Lens?

The ELPLM15 is an Epson original standard throw lens, with lens coating, optical structure, and body tolerances all built to original standards—ready to install and delivers stable imaging. For projects with tight installation constraints (large images at short distances, wall-mounted ultra-short throw), choosing the right throw ratio is more critical than opting for a generic lens.

Its throw ratio is 1.52:1-2.47:1. Remember this: throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (ideal for small spaces); the larger the value, the farther the projector needs to be. Work backward from your installation distance and screen size to find the required range, then match it to this model.

FAQ

Q: Which models are compatible with the ELPLM15? How do I check if my projector is on the list?

A: This article lists all verified compatible models (including installation projectors and their respective series). When checking, refer to the projector's lens mount and panel/chip size; projectors of the same generation and brand often share the same interface. If unsure, take a photo of the nameplate and send it to Zorsika technical support for the most reliable confirmation.

Q: Should I choose the original or a Zorsika replacement lens?

A: The original is manufactured by Epson, with parameters and body tolerances calibrated to original standards, ideal for projects requiring strict original consistency. Zorsika replacement lenses are independently designed to the same specifications, with throw ratio, imaging circle, and mount matching the original—offering better budget and lead time. Both options are available; choose based on your project requirements.

Q: How do I calculate and select the throw ratio?

A: Throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (short-throw/ultra-short-throw suits close-range, small spaces); the larger the value, the longer the installation distance required. Work backward from your installation distance and screen size to determine the required throw ratio range, then match it to this model's focal range.

Q: How can I ensure the ELPLM15 I purchase is genuine?

A: Zorsika sources genuine products through official channels, complete with original packaging and traceable serial numbers; for bulk projects, channel certificates can be provided to eliminate refurbished or unauthorized sources.

Q: What should I pay attention to when replacing the lens?

A: Power off the projector and wait for the fan to stop before removing or installing; hold the lens barrel without touching the glass, and use an air blower for dust; after installation, run a focus test before tightening, and clean the mount and contacts along the way.

Genuine Product and Procurement Information

Zorsika supplies the genuine Epson original lens ELPLM15 through official channels, complete with original packaging and traceable serial numbers, suitable for bulk procurement and project supply for installation projectors, conference rooms, classrooms, and more.

• Genuine Guarantee: Sourced through official original channels, with original packaging and serial numbers; channel certificates can be provided for bulk projects to eliminate refurbished or unauthorized sources.
• Compatibility Verification: Provide your projector model before ordering, and Zorsika technical support will verify against the compatible model list above to ensure a proper fit.
• Project Supply: The ELPLM15 covers 19 models; common projects can be scheduled in advance to shorten lead times.
• Replacement Options: If budget is a concern, Zorsika also offers replacement lenses with the same specifications, with key parameters matching the original—choose as needed.

Note: Actual imaging performance is affected by projector condition and installation environment; we recommend testing one unit before bulk ordering.

Related Inquiry Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For consultation on the Epson original lens ELPLM15, project proposals, or the full compatible model list, contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lens model and compatible model data in this article are sourced from original manufacturer data and the Zorsika product database; data is continuously updated and subject to final confirmation at the time of inquiry.