Digital Projection 109-682 Projector Lamp Quick Selection: 3 Models & Specs

When buying a projector lamp for a Digital Projection projector, check the model number first before anything else. Here's a quick reference for the 109-682 specifications and 3 compatible projector models.

Specifications of This Lamp

The above specifications are sourced from the Zorsika product database. For the full technical datasheet, please contact our sales team.

Where It Fits: List of 3 Compatible Digital Projection Models

The following are the verified compatible Digital Projection projector models for the 109-682, separated by commas:

M-Vision Cine 260, M-Vision Cine 260-HB, M-Vision Cine 260-HC

Note: Projectors from the same generation often share the same lamp module. For models not listed here, please contact Zorsika technical support for confirmation.

Same Specs, Why Choose Zorsika PRO

The 109-682 is a high-volume model. The Zorsika PRO series applies consistency control to the arc tube based on original factory parameters and adds an additional factory ignition test, ensuring better brightness and stability.

• Spec-Matched: Wattage, arc gap, and reflector size are matched item by item against original factory parameters
• Individually Tested: Each lamp is ignition-tested before shipping, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on lamps; normal use without man-made damage is covered by after-sales service
• Stable Supply: Supports bulk purchasing and project-based supply

In short: if you want original factory quality but also want a more hassle-free overall experience, the Zorsika PRO series projector lamp is designed exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, operating environment, and cooling conditions. Zorsika does not make unified numerical promises. We recommend testing 1-2 sample units before bulk purchasing.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series is "original factory parameters, self-controlled quality": wattage, arc gap, and reflector size are matched item by item to the original, but with an additional individual ignition test before shipping and a 180-day warranty. Compared to the original, it's more hassle-free overall; compared to other alternatives, quality control is more consistent.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO series is the first choice — matched item by item to original factory parameters, individually ignition-tested before shipping, with performance comparable to the original and a more hassle-free overall experience, plus a 180-day warranty. For regular commercial, educational, and conference room use, the PRO series is also the more worry-free choice. While other replacement lamps cost less, the arc tube source and quality control vary significantly, leading to higher risks of brightness decay and shortened lifespan. They are only recommended for temporary backup units.

Q: What should I do if the projector reports "lamp not recognized" after replacement?

A: First, check whether the lamp hour reset has been performed. Most alerts are caused by the timer not being reset. If the error persists after resetting, contact Zorsika technical support — we provide reset methods and troubleshooting guidance for the corresponding models.

Q: My projector is not in the 3-model list above. Can I use the 109-682?

A: The list covers verified models but is not exhaustive. Digital Projection products from the same generation often share lamp modules. Take a photo of the nameplate on the projector body and the original lamp label and send it to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation guide for the 109-682?

A: Yes. The lamp door location and disassembly/assembly steps for these Digital Projection models are basically the same. Contact Zorsika sales to get illustrated or video tutorials for the corresponding models.

Pitfall Avoidance: Three Key Checks Before Purchase

1. Check the Nameplate Model: Open the projector's lamp door — the model on the lamp module label should match 109-682 exactly. Some Digital Projection models have suffixes like -V or +, but the lamp module is usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the Lamp Form: The same model comes in four forms — original packaged, original bare, replacement, and used — and they differ significantly. Original bare means an original arc tube with a third-party frame, which usually offers the best overall value. Be sure to specify clearly on your order which form you want to avoid disputes upon delivery.
3. Verify Physical Specifications: Reflector size 51X51D, socket E20.6, and arc gap must match the original lamp. If any of these don't match, the lamp may not fit or may fail to ignite.

After Replacing the Lamp, Keep These Points in Mind

• Clean Dust Regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use Eco Mode Wisely: Prioritize eco mode when brightness is sufficient, as it reduces the thermal load on the lamp.
• Avoid Frequent On/Off Cycles: Thermal cycling is one of the main causes of lamp wear. If the projector won't be used for a short period, use the shutter function instead of repeatedly cutting power.
• Shut Down Properly: After powering off, wait for the fan to stop before disconnecting power. Cutting power while hot causes sudden cooling of the lamp, which is a common cause of lamp burst.
• Reset Lamp Hours After Replacement: After installing a new lamp, be sure to reset the lamp hour counter in the menu; otherwise, the projector will keep alarming based on the old timer.

Related Search Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiries

For consultation on Digital Projection 109-682 solutions, bulk pricing, or the full list of compatible models, contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module model, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated and subject to confirmation at the time of inquiry.