Digital Projection 113-628 Lamp Quick Reference: Specs + 3 Compatible Models

No need to read the manual: the core specifications of the Digital Projection 113-628 projector lamp, 3 compatible projector models, and the three things you should confirm before purchasing are all covered in this article.

Specifications of This Lamp

The above specifications are sourced from the Zorsika product database. For the full technical datasheet, please contact our sales team.

Digital Projection 113-628 Compatible Projector Models (3 in Total)

The following verified compatible Digital Projection projector models for the 113-628 are listed below, separated by commas:

Mercury 930, TITAN Quad 2000, TITAN 930

Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

What the Zorsika PRO Series Offers You

The Zorsika PRO Series provides a replacement lamp module for the 113-628 with the same specifications as the original, with key parameters matched one-to-one against the original. It supports project supply and bulk procurement, with more controllable lead times.

• Specification matching: Wattage, arc gap, and reflector size are matched item by item against the original parameters
• Individually tested: Each lamp is lit and tested before shipment, ensuring brightness and stability
• Warranty commitment: 180-day warranty on the lamp; normal-use failures not caused by human damage are covered by after-sales service
• Stable supply: Supports bulk procurement and project supply

In short: if you want original quality but also a more hassle-free overall experience, the Zorsika PRO Series projector lamp is designed exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, operating environment, and cooling conditions. Zorsika does not make uniform numerical commitments. We recommend testing 1-2 samples before bulk procurement.

Questions You May Have

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO Series lamp is "original parameters, self-controlled quality": wattage, arc gap, and reflector size are matched item by item against the original, but with an additional individual lit test before shipment and a 180-day warranty. Compared to the original, it offers a more hassle-free overall experience; compared to other alternatives, quality control is more consistent.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO Series lamp is the first choice—matched item by item to original parameters, individually lit and tested before shipment, with performance benchmarked against the original and a more hassle-free overall experience, plus a 180-day warranty. For regular commercial, educational, and conference room use, the PRO Series is also the more worry-free option. While other replacement lamps cost less, the arc tube source and quality control vary significantly, and the risk of brightness decay and shortened lifespan is higher. They are only recommended for temporary backup projectors.

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First, check whether the lamp hour counter has been reset—most alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support, and we will provide the reset method and troubleshooting guidance for the corresponding model.

Q: My projector is not in the 3-model list above. Can I use the 113-628?

A: The list covers verified models only and is not exhaustive. Digital Projection projectors of the same generation often share lamp modules. Take a photo of the nameplate and the original lamp label and send it to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation tutorial for the 113-628?

A: Yes. The lamp door location and disassembly/reassembly steps for these Digital Projection models are essentially the same. Contact Zorsika sales to get the illustrated or video tutorial for the corresponding model.

Before Ordering, Verify These Three Things

1. Check the nameplate model: Open the projector lamp door and confirm the model on the lamp module label matches 113-628 exactly. Some Digital Projection models may have suffixes like -V or +, but the lamp module is usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp format: The same model comes in four formats—original packaged, original bare, replacement, and used—which differ significantly. Original bare is an original arc tube with a third-party lamp frame and typically offers the best overall value. Be sure to specify clearly which format you want on the order to avoid disputes upon delivery.
3. Verify physical specifications: Parameters such as the arc gap must match the original lamp exactly. If any one of them does not match, the lamp may not fit or may fail to light up.

After Replacing the Lamp, Keep These Points in Mind

• Clean dust regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use eco mode wisely: In situations where brightness is sufficient, prioritize eco mode to reduce the thermal load on the lamp.
• Avoid frequent on/off cycles: Thermal cycling is one of the main sources of lamp wear. If the projector will not be used for a short period, use the shutter function instead of repeatedly cutting power.
• Shut down correctly: After powering off, wait for the fan to stop spinning before cutting power. Powering off while the lamp is still hot causes rapid cooling and is a common cause of lamp rupture.
• Reset the lamp hour counter after replacement: Be sure to reset the lamp hour counter in the menu after installing a new lamp; otherwise, the projector will continue to alert based on the old timer.

Related Search Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiries

For solution consultations, bulk procurement plans, or the full compatible model list for the Digital Projection 113-628, please contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module model, specification parameters, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated; please confirm with an actual inquiry.