One Table to Understand Digital Projection 114-318 Projector Lamp (Compatible with 1 Model)

When buying a projector lamp for a Digital Projection projector, check the model number first before anything else. Here's a quick reference for the 114-318 specifications and 1 compatible projector model.

Specifications at a Glance

The above specifications are from the Zorsika product database. Contact our sales team for the full technical datasheet.

Digital Projection 114-318 Compatible Model List (1 Model Total)

Below are the verified compatible Digital Projection projector models for the 114-318, separated by commas:

M-VISION 930 SERIES

Note: Projectors from the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

What the Zorsika PRO Series Offers You

For high-volume standard lamp modules like the 114-318, the Zorsika PRO Series provides replacement solutions with the same specifications as the original. Power, arc gap, and reflector size are matched item by item against the original, and every unit is individually tested before shipping — install and use, no structural modifications needed.

• Specification Matching: Power, arc gap, and reflector size are matched item by item to original parameters
• Individual Testing: Every lamp is individually tested before shipping, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on lamps; non-artificial damage under normal use is covered by after-sales service
• Stable Supply: Supports bulk procurement and project-based supply

In short: if you want original quality but also want a more hassle-free overall experience, the Zorsika PRO Series projector lamp is designed exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, operating environment, and cooling. Zorsika does not make uniform numerical promises; we recommend testing 1-2 sample units before bulk procurement.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO Series lamp is "original parameters, self-controlled quality": power, arc gap, and reflector size are matched item by item to the original, but with an additional individual testing step before shipping, plus a 180-day warranty. Compared to the original, it's more hassle-free overall; compared to other alternatives, quality control is more consistent.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO Series lamp is the first choice — matched item by item to original parameters, individually tested before shipping, with performance comparable to the original and a more hassle-free experience overall, plus a 180-day warranty. For regular business, education, and conference room use, the PRO Series is also the more reliable choice. While other replacement lamps cost less, the arc tube source and quality control vary significantly, with higher risks of brightness degradation and shortened lifespan — they're only recommended for temporary backup units.

Q: What if the projector shows "lamp not recognized" after replacement?

A: First, check whether the lamp hour counter has been reset — most alerts are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support; we provide reset methods and troubleshooting guidance for the corresponding models.

Q: My projector isn't on the 1-model list above. Can I use the 114-318?

A: The list covers verified models but isn't exhaustive. Digital Projection projectors from the same generation often share lamp modules. Take photos of the unit's nameplate and the original lamp label and send them to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation guide for the 114-318?

A: Yes. The lamp door location and removal/installation steps for these Digital Projection models are essentially the same. Contact Zorsika sales to get illustrated or video tutorials for the corresponding models.

Before Ordering, Verify These Three Things

1. Check the Nameplate Model: Open the projector's lamp door; the model on the lamp label should match 114-318 exactly. Some Digital Projection models have suffixes like -V or +, but the lamp module is usually interchangeable. When in doubt, send a photo of the nameplate to Zorsika technical support for confirmation.
2. Confirm the Lamp Type: The same model comes in four forms — original packaged, original bare, replacement, and used — and they differ significantly. Original bare means an original arc tube with a third-party frame, usually offering the best overall value; be sure to specify which type you want clearly on the order to avoid disputes upon delivery.
3. Verify Physical Specifications: Items like arc gap must match the original lamp exactly; any mismatch could mean the lamp won't fit or won't light up.

After Replacing the Lamp, Keep These Points in Mind

• Clean Dust Regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use Eco Mode Wisely: Prioritize eco mode where brightness is sufficient to reduce the lamp's thermal load.
• Avoid Frequent On/Off Cycles: Thermal cycling is a major source of lamp wear. If the projector won't be used for a short period, use the shutter/blank function instead of repeatedly cutting power.
• Shut Down Properly: After powering off, wait for the fan to stop before cutting power. Cutting power while hot causes sudden cooling of the lamp — a common cause of lamp rupture.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp hour counter in the menu; otherwise, the projector will keep alerting based on the old timer.

Related Search Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Procurement Inquiries

For solution consultation, bulk pricing, or the full compatible model list for the Digital Projection 114-318, contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article are from the Zorsika product database. Data is continuously updated; please confirm with actual quotations.