Projectiondesign 400-0184-00 Projector Lamp: Specs, 6 Compatible Models & Buying Checklist

When replacing a Projectiondesign projector lamp, the most time-consuming part is often not the removal and installation, but confirming the model number matches. The 400-0184-00 covers 6 Projectiondesign projector models. This article clearly lists the specifications, compatible models, and key points to verify.

Specifications at a Glance

The above specifications are sourced from the Zorsika product database. For the full technical datasheet, please contact our sales team.

Where It Fits: List of 6 Compatible Projectiondesign Models

The following are the verified compatible Projectiondesign projector models for the 400-0184-00, separated by commas:

F1+ SX+E, F1+ WIDE, F1+ SX+, F1+, F1 SX+, F1+ SXGA+

Note: Projectors from the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Before Ordering, Verify These Three Things

1. Check the Nameplate Model: Open the projector's lamp door and ensure the model on the lamp label matches 400-0184-00 exactly. Some Projectiondesign models may have suffixes like -V or +, but the lamp module is usually interchangeable. If in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the Lamp Form: The same model comes in four forms: original packaged, original bare, replacement, and used. These four forms differ significantly. Original bare means an original arc tube with a third-party frame, which typically offers the best overall value. Be sure to specify which form you need clearly on the order to avoid disputes upon delivery.
3. Verify Physical Specifications: The reflector size 56X56D, socket E21.8, and arc gap must match the original lamp exactly. If any of these do not match, the lamp may not fit or may fail to ignite.

What the Zorsika PRO Series Offers You

The Zorsika PRO Series provides a replacement lamp module for the 400-0184-00 with the same specifications as the original, with key parameters matched item by item against the original. It supports project supply and bulk procurement with more controllable lead times.

• Specification Matching: Power, arc gap, and reflector size are matched item by item against original parameters
• Individual Testing: Each lamp is individually lit and tested before shipment, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on the lamp; normal use with non-artificial damage is covered by after-sales service
• Stable Supply: Supports bulk procurement and project supply

In short: if you want original quality but with greater overall peace of mind, the Zorsika PRO Series projector lamp is designed exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, usage environment, and cooling conditions. Zorsika does not make unified numerical commitments. We recommend testing 1-2 sample lamps before bulk procurement.

Daily Maintenance to Extend Lamp Life

• Clean Dust Regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use Eco Mode Wisely: This lamp supports dual power modes of 300W / 250W. Switching to eco mode for everyday presentations can significantly reduce the lamp's thermal load.
• Avoid Frequent On/Off Cycles: Thermal cycling is one of the main causes of lamp wear. If the projector won't be used for a short period, use the shutter function instead of repeatedly cutting power.
• Shut Down Properly: After powering off, wait for the cooling fan to stop before disconnecting power. Cutting power while the lamp is hot causes sudden cooling, which is a common cause of lamp rupture.
• Reset Lamp Hours After Replacement: After installing a new lamp, be sure to reset the lamp hour counter in the menu; otherwise, the projector will continue to alarm based on the old timer.

Frequently Asked Questions

Q: My projector is not on the list of 6 models above. Can I use the 400-0184-00?

A: The list covers verified models but is not exhaustive. Projectiondesign projectors from the same generation often share lamp modules. Send photos of the projector nameplate and original lamp label to Zorsika technical support, and we can help confirm compatibility.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you prioritize stable brightness and long-term reliability, the Zorsika PRO Series lamp is the top choice—it matches original parameters item by item, undergoes individual lit testing before shipment, delivers performance comparable to the original with greater overall peace of mind, and comes with a 180-day warranty. For regular commercial, educational, and conference room use, the PRO Series is also the more hassle-free option overall. While other replacement lamps are cheaper, the arc tube source and quality control vary significantly, leading to higher risks of brightness decay and shortened lifespan. They are only recommended for temporary backup projectors.

Q: Why choose Zorsika PRO instead of the original?

A: The core philosophy of the Zorsika PRO Series lamp is "original parameters, self-controlled quality": power, arc gap, and reflector size are matched item by item against the original, but with an additional individual lit test before shipment and a 180-day warranty. Compared to the original, it offers greater overall peace of mind; compared to other alternatives, quality control is more consistent.

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First, confirm whether the lamp hour reset was performed—most alerts are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support. We provide reset methods and troubleshooting guidance for the corresponding models.

Q: Is there an installation tutorial for the 400-0184-00?

A: Yes. The lamp door location and removal/installation steps for these Projectiondesign models are essentially the same. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding models.

Related Inquiry Portals

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For consultation on the Projectiondesign 400-0184-00, bulk solutions, or a complete list of compatible models, please contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated and subject to actual quotation confirmation.