Projectiondesign 400-0402-00 Projector Lamp - Compatible with 22 Models & Selection Guide

When replacing a Projectiondesign projector lamp, the most time-consuming part is often not the removal and installation, but confirming the model number matches. The 400-0402-00 covers 22 Projectiondesign projector models. This article clearly lists the specifications, compatible models, and key verification points.

Specifications of This Lamp

The above specifications are sourced from the Zorsika product database. For the complete technical datasheet, please contact our sales team.

Where It Works: List of 22 Compatible Projectiondesign Models

The following are the verified compatible Projectiondesign projector models for the 400-0402-00, separated by commas:

F22 WUXGA, F22 1080p, F22 SX+, F20 Medical, evo22sx+, evo20sx+, Action! M20, cineo 20, cineo 22, F22 720p, F21 WUXGA, F21 720p, F21 1080p, F21 SXGA+, Action! 2, F20 SX+ Medical, F20, F2 SX+, F2, evo2sx+, evo2, M20

Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Avoiding Purchase Pitfalls: Three Key Verification Points

1. Verify the Nameplate Model: Open the projector's lamp door; the model on the lamp module label should exactly match 400-0402-00. Some Projectiondesign models may have suffixes like -V or +, but the lamp module is usually interchangeable. If unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the Lamp Form: The same model comes in four forms: original with packaging, original bare, replacement, and used. These four forms differ significantly. Original bare lamps use an original arc tube with a third-party frame, typically offering the best overall cost-performance. Be sure to specify which form you want clearly on your order to avoid disputes upon delivery.
3. Verify Physical Specifications: The reflector size 45X45D, socket E19, and arc gap must match the original lamp. If any of these do not match, the lamp may not fit or may fail to ignite.

Why Choose Zorsika PRO for the Same Specifications

For high-volume, standard lamp modules like the 400-0402-00, the Zorsika PRO series offers replacement solutions with the same specifications as the original. Power, arc gap, and reflector size are matched item by item against the original, and each lamp is individually tested before shipment, so it works right out of the box with no structural modifications needed.

• Specification Matching: Power, arc gap, and reflector size are matched item by item to original parameters
• Individual Testing: Each lamp is individually tested before shipment, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on lamps; non-artificial damage under normal use is covered by after-sales service
• Stable Supply: Supports bulk purchasing and project-based supply

In short: if you want original quality but also want a more hassle-free overall experience, the Zorsika PRO series projector lamps are designed exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical commitments. We recommend testing 1-2 sample lamps before bulk purchasing.

Daily Maintenance to Extend Lamp Life

• Clean Dust Regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use Eco Mode Wisely: This lamp supports dual power modes of 220W / 170W. Switching to eco mode for everyday presentations can significantly reduce the lamp's thermal load.
• Avoid Frequent On/Off Cycles: Thermal cycling is one of the main causes of lamp wear. If the projector won't be used for a short period, use the shutter function instead of repeatedly cutting power.
• Shut Down Properly: After powering off, wait for the fan to stop before disconnecting power. Cutting power while the lamp is still hot causes sudden cooling, which is a common cause of lamp rupture.
• Reset Lamp Hours After Replacement: After installing a new lamp, be sure to reset the lamp hour counter in the menu; otherwise, the projector will continue to alarm based on the old timer.

Frequently Asked Questions

Q: My projector is not on the 22-model list above. Can I use the 400-0402-00?

A: The list represents verified models, not the full scope. Projectiondesign projectors of the same generation often share lamp modules. Send photos of the projector nameplate and the original lamp label to Zorsika technical support, and we can help confirm compatibility.

Q: How do I choose between original with packaging, original bare, and replacement lamps?

A: If you prioritize stable brightness and long-term reliability, the first choice is the Zorsika PRO series lamp—matched item by item to original parameters, individually tested before shipment, with performance comparable to the original and a more hassle-free overall experience, plus a 180-day warranty. For regular commercial, educational, and conference room use, the PRO series is also the more worry-free choice overall. While other replacement lamps are cheaper, the arc tube source and quality control vary significantly, leading to higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup projectors.

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamps is "original parameters, self-managed quality control": power, arc gap, and reflector size are matched item by item to the original, but with an additional individual ignition test before shipment and a 180-day warranty. Compared to the original, it's more hassle-free overall; compared to other alternatives, quality control is more consistent.

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First, confirm whether the lamp hour reset was performed—most such alerts are caused by a timer that hasn't been reset. If the error persists after resetting, contact Zorsika technical support. We provide reset methods and troubleshooting guidance for the corresponding models.

Q: Is there an installation tutorial for the 400-0402-00?

A: Yes. The lamp door location and removal/installation steps for these Projectiondesign models are basically the same. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding models.

Related Inquiry Portals

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchase Consultation

For consultation on the Projectiondesign 400-0402-00, bulk solutions, or the complete list of compatible models, please contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module model, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated; please confirm with actual inquiries for accuracy.