Zorsika WD302 Projector Lens Compatible Models (3 Models)

The projector lens directly determines the image size and clarity. The WD302 covers 3 JVC models; confirm compatibility against the list before replacing the lens.

Lens Specifications at a Glance

The above specifications are sourced from the Zorsika product database. Contact sales for the full technical datasheet.

Compatible Models: 3 JVC Projectors (with Brightness, Resolution, Zoom Ratio)

The following are verified compatible models for the WD302 (JVC projectors), each with brightness, resolution, and zoom ratio:

Note: Brightness, resolution, and zoom ratio are taken from the Zorsika product database (refer to the model nameplate/manual for accuracy); lens compatibility is based on the body interface and optical structure. For models not listed, contact Zorsika technical support for confirmation.

Why Choose Zorsika

For engineering lenses like the WD302, Zorsika benchmarks each item against the original optical parameters (focal length, throw ratio, lens groups), with consistent lens coating technology, delivering sharp images with no soft edges, ready to install and use.

Zorsika's equivalent replacement lens is compatible with 3 models including JVC LX-N69B, LX-N59W, and LX-N690B; enter WD302 in the search system on the Zorsika official website to view the full list of compatible models.

• Optical Benchmarking: Focal length, throw ratio, and lens groups matched to original parameters
• Resolution Testing: Each lens individually tested before shipment, MTF data available
• Coating Process: Lens coating on par with the original, reducing light loss
• Stable Supply: Supports bulk procurement and project supply

In short: The lens is the optical core—don't gamble on image quality to save a few dollars. Zorsika projector lenses are manufactured to original drawings, offering an overall advantage.

Note: Actual image performance is affected by projector condition and installation environment; we recommend testing one unit before bulk procurement.

What to Keep in Mind When Replacing the Lens?

• Power off before replacing the lens: Always turn off the projector and wait for the cooling fan to stop before removing or installing the lens to avoid damaging the interface with power on.
• Don't touch the glass: Fingerprints and oil can directly affect image quality. Hold the lens barrel, not the glass; use a blower for dust and avoid dry wiping with a cloth.
• Lock after focusing: Test focus after installation, then tighten the locking screws to prevent image drift from loosening over time.
• Keep the interface clean: Dust on the mount and contacts can cause poor connectivity; clean them when replacing the lens for peace of mind.

FAQ

Q: My projector isn't in the 3 models listed above. Can I use the WD302?

A: The list covers verified models but isn't exhaustive. Engineering projectors of the same brand and generation often share the same lens mount. Send a photo of the nameplate and original lens to Zorsika technical support for confirmation.

Q: Can this lens replace the original one?

A: The lens is the core of the projection optical path, directly determining clarity and color. Zorsika lenses (model shown in the spec table above) are benchmarked item by item against original optical parameters (focal length, throw ratio, lens groups), with consistent coating technology, delivering sharp images with no soft edges; ordinary replacement lenses often use standard glass with insufficient coating layers, making brightness loss and color shift obvious at a glance. For engineering and exhibition scenarios, Zorsika is the recommended choice.

Q: Why choose Zorsika over the original?

A: Zorsika lenses are manufactured to original optical drawings, with lens groups, coating, and throw ratio benchmarked item by item, and each lens undergoes resolution testing before shipment. Compared to the original, lead times are shorter and overall value is better; compared to other replacement lenses, optical quality is backed by data.

Q: What if the lens doesn't match the image size?

A: First confirm the lens mount and optical axis position of your model, then choose a lens with the appropriate throw ratio based on your actual installation distance; if unsure, send the installation distance and screen size to Zorsika technical support, and we'll help you recommend one.

Q: Is there an installation guide for the WD302?

A: Yes. The lens removal and installation steps for JVC models like these are largely the same. Contact Zorsika sales to get illustrated or video instructions for your specific model.

Q: What is the warranty period for the lens?

A: All Zorsika projector lenses come with a 12-month warranty; for normal use and non-man-made damage (e.g., impact, water ingress, unauthorized disassembly), contact after-sales service directly. The warranty period is based on the shipping document date.

Related Search Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For consultation on Zorsika WD302 solutions, project proposals, or the full list of compatible models, contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lens model and compatible model data in this article are sourced from the Zorsika product database and are continuously updated; final confirmation is subject to actual inquiry.