At a glance
- Specifications
- FP-ZL125 Standard Zoom Compatible Projector Models (1 model total, with brightness/resolution)
- About This Original Lens
- Genuine Product and Purchasing Information
- FAQ
- Q: How do I choose between an original lens and a replacement lens?
- Q: How do I confirm this lens works with my projector?
- Q: How do I choose the throw ratio?
- Q: How is the FP-ZL125 Standard Zoom guaranteed to be genuine?
- Q: What should I pay attention to when replacing the lens?
- Q: What is the warranty period for the lens?
- Related Inquiry Links
- Purchase Consultation
Fujifilm original lens FP-ZL125 Standard Zoom, standard throw, throw ratio 1.25-2.00:1, compatible with 1 Fujifilm projector model including ZUH12000. Genuine supply, bulk purchase available for projects.
The Fujifilm FP-ZL125 Standard Zoom is an original (OEM) lens for Fujifilm installation projectors. It belongs to the standard throw category with a throw ratio of 1.25-2.00:1. This article compiles its 1 compatible projector model, optical specifications, and purchasing considerations for quick compatibility verification by projector model.
Specifications
| Lens Model | FP-ZL125 Standard Zoom |
| Brand (OEM) | Fujifilm (Fujifilm) |
| Throw Ratio | 1.25-2.00:1 |
| Product Type | Standard Throw |
| Number of Compatible Models | 1 model |
| OEM Product Page | Fujifilm Official Introduction |
The above specifications are sourced from OEM documentation and the Zorsika product database; the full technical datasheet is available upon request from our sales team.
FP-ZL125 Standard Zoom Compatible Projector Models (1 model total, with brightness/resolution)
The following are verified compatible projector models for the FP-ZL125 Standard Zoom, each with brightness and resolution; the compatible lens model for all is FP-ZL125 Standard Zoom:
| Projector Model | Brightness | Resolution | Lens Model |
|---|---|---|---|
| Fujifilm ZUH12000 | — | — | FP-ZL125 Standard Zoom |
Note: Brightness/resolution are taken from the model database (refer to the nameplate/user manual on the unit); lens compatibility is determined by the lens mount on the projector and the panel/chip size. For models not listed, please contact Zorsika technical support for confirmation.
About This Original Lens
Fujifilm FP-ZL125 Standard Zoom Lens
The FP-ZL125 Standard Zoom is a standard throw lens manufactured by Fujifilm as an OEM product. Its optical structure, lens coatings, and body tolerances are all matched to the original projector standards, ensuring plug-and-play installation and stable imaging. For installation environments with limited projection distance (e.g., short-distance large images, ultra-short-throw wall-mounted setups), choosing the correct throw ratio is more critical than opting for a generic lens.
This lens has a throw ratio of 1.25-2.00:1. Throw ratio = projection distance ÷ image width: the smaller the value, the larger the image (ideal for short distances in small spaces); the larger the value, the greater the installation distance required. Work backward from your on-site installation distance and screen size to determine the required throw ratio range, then match it to this model.
Genuine Product and Purchasing Information
Zorsika offers genuine channel supply for the Fujifilm original lens FP-ZL125 Standard Zoom, complete with OEM packaging and traceable serial numbers, suitable for bulk procurement and project supply for installation projectors, conference rooms, classrooms, and similar projects.
- Genuine Product Guarantee: Sourced through official OEM channels, with OEM packaging and serial numbers; for bulk projects, channel documentation can be requested to rule out refurbished units or unverified sources.
- Compatibility Verification: Provide the projector model before ordering, and Zorsika technical support will verify against the compatible model list above to ensure a proper fit.
- Project Supply: The FP-ZL125 Standard Zoom covers 1 projector model; common projects can be scheduled in advance to shorten lead times.
- Alternative Options: If budget is a concern, Zorsika also offers equivalent replacement lenses with key specifications benchmarked against the OEM product, allowing you to choose based on your needs.
Note: Actual imaging performance is affected by projector condition and installation environment; it is recommended to test 1 unit before large-volume procurement.
FAQ
Q: How do I choose between an original lens and a replacement lens?
A: Original lenses are manufactured by Fujifilm, with optical parameters and body tolerances calibrated to the original projector, making them ideal for projects with strict requirements for OEM consistency. Zorsika replacement lenses are independently designed and manufactured to the same specifications, with throw ratio, image circle, and mount matched to the original unit, offering advantages in budget and lead time. Zorsika supplies both options, so choose based on your project requirements.
Q: How do I confirm this lens works with my projector?
A: The lens mount on the projector and the panel/chip size are the determining factors; this article lists verified compatible models. Projectors from the same generation and brand often share the same mount; if unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation—this is the safest approach.
Q: How do I choose the throw ratio?
A: Throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (short-throw/ultra-short-throw is ideal for short distances in small spaces); the larger the value, the greater the installation distance required. Work backward from your installation distance and screen size to determine the required throw ratio range, then match it to this model's focal range.
Q: How is the FP-ZL125 Standard Zoom guaranteed to be genuine?
A: Zorsika supplies genuine products through OEM channels, with OEM packaging and traceable serial numbers; for bulk projects, channel documentation can be requested to ensure the product is not refurbished or a used disassembled part.
Q: What should I pay attention to when replacing the lens?
A: Always power off the projector and wait for the cooling fan to stop before removing or installing the lens; hold the lens barrel and avoid touching the glass, use a blower to gently remove dust; after installation, test focus before tightening the locking screws, and clean the mount and contacts as you go.
Q: What is the warranty period for the lens?
A: Zorsika provides a 12-month warranty on all projector lenses; for normal use and non-man-made damage (e.g., impact, water ingress, unauthorized disassembly), contact after-sales service directly, with the warranty period starting from the shipping document date.
Related Inquiry Links
- Zorsika Technical Support Center
- Projector Brand and Compatible Model Lookup
- Projector Lamp / Lens / Air Filter Product Library
Purchase Consultation
For consultation on the Fujifilm original lens FP-ZL125 Standard Zoom, project proposals, or the full compatible model list, please contact us through the following channels:
- Website: www.zorsika.com
- Phone: 0086-20-38551187
- Email: sales@zorsika.com
- Business Hours: Monday to Friday, 9:00-18:00
The lens model and compatible projector data in this article are sourced from OEM documentation and the Zorsika product database; data is continuously updated and subject to confirmation at the time of inquiry.