UV Curing Lamp - Zosika AKL-300PHB · Replacement Lamp for PHOENIX MLS-300BH Light Source
DC 300W · 7000K simulated daylight · Compatible with MLS-300BH fiber-optic cold-light units, plug-and-play.
Key Specifications Comparison
| Item | Zorsika AKL-300PHB | PHOENIX MLS-300BH Light Source |
|---|---|---|
| Light Source Type | 300W short-arc metal halide lamp | 300W short-arc metal halide lamp (visible-light daylight type) |
| Rated Power | DC 300W | DC 300W |
| Color Temperature | ≈7000K | ≈7000K |
| Output Method | Cold-light output via fiber-optic light guide | Cold-light output via fiber-optic light guide |
| Average Lifetime | Approx. 1,500 hours | Approx. 1,500 hours |
| Compatible Main Unit | MLS-300BH fiber-optic cold-light unit | MLS-300BH fiber-optic cold-light unit |
1. All Specifications Aligned — Same-Grade Replacement Without Barriers
Power, color temperature, output method, and interface specifications are fully identical to the MLS-300BH light source. Optical output matches the original standard, so no light-intensity recalibration is needed after replacement and line changeover carries zero learning cost.
2. 7000K Simulated Daylight — Faithful Color Reproduction
A 7000K color temperature corresponds to the natural-light spectrum, accurately reproducing sensitive color ranges such as white, blue, and green. It serves as a shared color benchmark for both human visual inspection and machine vision camera imaging, and replacing the lamp will not shift your rejection standards.
3. Fiber-Coupled Design — Cold Light with Low Thermal Radiation
The lamp body and reflector are packaged as one unit, and the light is concentrated and delivered through a fiber-optic light guide. Thermal radiation in the working area is low, making it suitable for close-range illumination near samples, lenses, and sensors, and convenient for optical-path layout and interference shielding.
4. Short-Arc Structure — A Near-Point Source That Couples Easily
Short-arc discharge technology keeps the arc extremely short, with concentrated light that is easy to collect and collimate. Combined with a reflector, it enables efficient coupling into a fiber — an ideal point-source solution for precision optical systems.
5. Supply and Cost Advantages of a Domestic Alternative
Compared with the imported original, the AKL-300PHB has ample stock and controllable lead time, with a per-lamp cost significantly lower than the OEM. It suits batch replacement on lines with multiple machines and frequent lamp changes.
Mainstream Application Scenarios
- ▪ Display panel industry: LCD/OLED panel appearance defect inspection, Mura inspection, and lamination bubble identification
- ▪ Optical lens supply chain: defect and coating-uniformity inspection of lenses, prisms, and filters; coaxial light with vertical illumination removes specular reflection
- ▪ Semiconductor & Precision Electronics: wafer surface inspection, IC package appearance inspection, and PCB/FPC solder-joint AOI
- ▪ Microscope illumination & machine vision imaging: AOI camera light sources, microscope coaxial/oblique illumination, and spectral calibration
- ▪ Light visible-light assisted curing: visible-light auxiliary exposure stations on small curing equipment (note: this product is predominantly visible light and is not intended for high-power UV primary curing; please confirm applicability against the spectral requirements of the end curing machine)