FA102 Projector Lens for Barco G100-W16, G100-W19, G100-W22, G100-W25

FA102 is a medium-to-long-throw lens for Barco engineering projectors. It is compatible with 4 projector models from 1 model series. This article compiles the lens specifications, installation distance, model compatibility list, and replacement considerations in one place.

1. Lens Specifications

2. Installation Distance

The throw ratio for this model has not yet been recorded. Please base the installation distance on the nameplate on the physical unit and the manual, or contact us to calculate it using the on-site dimensions.

3. Compatible Projector Models (4 Models, Barco)

The table below is ordered by model production date, from newest to oldest and includes each model's resolution, brightness, and factory-installed lens zoom ratio, making it easy to identify the right option for your project.

Common Features of These Models

The throw ratios for the factory-installed standard lenses on these 4 models are mostly listed as Depends on the lens. The FA102 provides an adjusted focal-length range, allowing the same projection distance to produce different image sizes—this is the direct reason for replacing the lens. It also retains full lens-shift capability, so the image can still be properly aligned after the focal-length range is adjusted.

4. Three Checks Before Replacement

• Verify the panel size. The panel specifications for this model have not yet been recorded. Please send us a photo of the projector's nameplate for confirmation.
• Check the interface and locking mechanism. Platforms of the same generation generally share compatible interfaces, but the locking-tab position varies by generation. If the image is skewed or the edges are not sharp after installation, the lock is usually not fully engaged rather than the lens itself being faulty.
• A fixed-focus lens has no zoom adjustment. Image size can only be changed by moving the projector, so the site dimensions must be measured accurately in advance, allowing an extra 10–20 cm at the endpoints.

To confirm whether a model not on the list is compatible, it is safer to send us photos of the projector's nameplate and original lens for verification—platforms of the same generation often share an interface, but it is not worth the risk of ordering based only on a similar model designation.