ZORSIKA
Find model-matching, product selection, maintenance and purchasing answers from ZORSIKA. Select a product range or send the original part code for a quotation.
Match a replacement lamp using the complete projector model and original lamp or module code. Also confirm whether you need a bare bulb or complete housing; photographs of the original labels and connectors help ZORSIKA check the configuration.
Original and compatible refer to product origin, not a universal quality grade. Distinguish an original complete module, an original bulb in another housing and a compatible assembly; ZORSIKA's own-brand lamps must be identified separately from original products.
Lamp life varies with the exact bulb, operating mode, cooling and switching pattern. Rated life is not a guaranteed runtime or the same as warranty; quote only the model-specific specification and test conditions.
Replacement cost depends on the bulb or module code, product origin, housing configuration and quantity. Ask ZORSIKA for an itemised quote showing what is supplied, applicable warranty and shipping terms.
A compatible lamp may be considered when the exact projector, electrical characteristics, optical configuration and housing fit are verified. It is not automatically equivalent to OEM, and any effect on the projector manufacturer's warranty should be checked separately.
Replacement may be needed when the projector displays a lamp warning, brightness becomes inadequate, ignition fails or the specified service limit is reached. Similar symptoms can have other causes, so inspect cooling and diagnostics before ordering parts.
Brightness can decline as a lamp ages, but dirty optics, blocked filters, operating mode and image settings can also reduce output. Compare conditions consistently; a low-brightness complaint does not by itself identify a defective lamp.
Only replace a lamp yourself if the projector manual permits user replacement. Follow shutdown, unplugging, cooling and handling instructions; internal high-voltage work or damaged assemblies require qualified service personnel.
A bare bulb is the light source without the complete mounting assembly. A lamp module normally includes a housing and model-specific fittings; confirm exactly what is included, since a similar-looking housing does not guarantee fit.
Aftermarket reliability depends on the bulb, assembly, compatibility and quality controls. ZORSIKA's lamp range should be assessed by the specific supplied product and documented warranty, not an unsupported category-wide failure-rate claim.
There is no universally most reliable lamp brand for every projector. Select an appropriate original or compatible configuration by part code, documented source and applicable warranty; compare equivalent products under comparable operating conditions.
Some projectors retain the previous lamp counter until it is reset using the prescribed procedure. Other warnings can indicate installation or detection faults; do not keep resetting a warning without checking the exact displayed code.
Use the lamp-timer reset procedure in the specific projector manual after the required lamp replacement. Do not reset an ageing lamp to postpone replacement or assume a counter reset confirms the new lamp has passed inspection.
Some projector lamps operate at high pressure and can rupture, particularly when damaged, overheated or beyond their service life. Stop use if abnormal symptoms occur; follow the manufacturer procedure for cooling, isolation and broken-lamp handling.
Warranty is product-specific and separate from rated lamp life. ZORSIKA's published general lamp service terms list 180 days; cinema-lamp or other special order terms must be stated separately in the quotation, including any hour limit and claim conditions.
Discontinued projector lamps may remain available by original part number or a confirmed compatible assembly. Send ZORSIKA the projector model, lamp label, required configuration and quantity for a current availability check.
Do not substitute a lamp solely because it fits physically or has a similar wattage. Ballast compatibility, arc geometry, thermal behaviour and the approved lamp specification must match the projector's requirements.
A new lamp may fail to start because of the wrong module, incomplete seating, an open cover interlock, connection problems or a projector fault. Stop repeated ignition attempts and use the model's error diagnostics before exchanging parts.
Request a ZORSIKA bulk quotation with exact lamp codes, original or compatible preference, housing requirements, quantities and delivery destinations. Repeat-order pricing and lead time should be confirmed against the agreed specification, not inferred from a sample price.
Check the lamp label and local collection rules before disposal. Some projector lamps contain mercury and require specialised collection; keep used lamps protected, and follow manufacturer and local-authority guidance rather than placing them in ordinary waste.
No matching questions. Try the equipment model or product type.
Send your full equipment model, original part code, photographs, quantity and delivery country.
Contact ZORSIKA →